< Back ×
My Vehicle Change Vehicle
2010 Buick Enclave
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Buick Enclave Brake Booster
PartNumber: 84158418
Product Specifications- Other Names: Brake Booster
- Item Dimensions: 13.1 x 11.9 x 11.6 inches
- Item Weight: 7.80 Pounds
- Replaced by: 19432798
- Part Description: 2010 Buick Enclave Brake Booster
Vehicle Fitment- 2010 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$118.52 MSRP:$223.64You Save: $105.12 (48%)
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2010 Buick Enclave
PartNumber: 54-71937Product Specifications- Notes: without Master Cylinder
- Booster Outlets: 1
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 9.673"
- Diaphragm Type: Single
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M8 x 1.25
- Material: Steel
- Part Description: 2010 Buick Enclave Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2010 Buick Enclave | All Trims | All Engines
$73.52OEM (Genuine) 2010 Buick Enclave Power Booster
PartNumber: 84635614
Product Specifications- Other Names: Brake Booster, Power Booster
- Item Dimensions: 13.6 x 12.4 x 11.9 inches
- Item Weight: 8.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20876879, 20831871, 84158418
- Replaced by: 19432798
- Part Description: 2010 Buick Enclave Power Booster
Vehicle Fitment- 2010 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
$118.52 MSRP:$223.64You Save: $105.12 (48%)
Centric® Power Brake Booster for 2010 Buick Enclave
PartNumber: 160.81154Product Specifications- Notes: w/2 Outlets
- UPC: 805890577508
- Part Description: 2010 Buick Enclave Power Brake Booster
Vehicle Fitment- 2010 Buick Enclave | All Trims | All Engines
Centric® Power Brake Booster for 2010 Buick Enclave
PartNumber: 160.81265Product Specifications- Notes: w/1 Outlet
- UPC: 889590294491
- Part Description: 2010 Buick Enclave Power Brake Booster
Vehicle Fitment- 2010 Buick Enclave | All Trims | All Engines
FAQ for Brake Booster Repair
Q: What is the recommended torque for the 4 vacuum brake booster nuts?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power brake booster auxiliary pump bracket bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Power Brake Booster Auxiliary Pump?
A:
Turn the ignition switch to the OFF position. Apply and release the brake pedal several times. Remove the fuel injector sight shield. Release the quick connect. Position the vacuum brake booster hose assembly aside. Disconnect the power brake booster auxiliary pump electrical connector. Release the power brake booster auxiliary pump electrical connector. Remove the power brake booster auxiliary pump bolts and the pump. Remove the power brake booster auxiliary pump insulators and sleeves. Remove the power brake booster auxiliary pump bracket bolts and bracket.
By Bob
GM Specialist
01/11/2022Q: What needs to be done before servicing the Power Vacuum Brake Booster?
A:
Place the vehicle on a level surface and apply the parking brake.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Power Brake Booster Vacuum Sensor?
A:
Turn the ignition switch to the OFF position. Apply and release the brake pedal several times until the brake pedal becomes firm to deplete the brake booster vacuum reserve. Remove the windshield washer solvent heater, if equipped. Disconnect the power brake booster vacuum sensor electrical connector. Disconnect the power brake booster check valve with the vacuum sensor and hose assembly. Release the clamp and remove the power brake booster vacuum sensor.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Power Brake Booster Vacuum Sensor?
A:
Install the power brake booster vacuum sensor. Secure the clamp to the power brake booster vacuum hose. Install the power brake booster check valve with the vacuum sensor and hose assembly to the brake booster. Connect the power brake booster vacuum sensor electrical connector. Install the windshield washer solvent heater, if equipped.
By Bob
GM Specialist
01/11/2022See more FAQs (1)