Part Description: 2009 GMC Sierra 1500 Valve Cover
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, HT, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS
$52.63MSRP: $83.58
You Save: $30.95 (38%)
FAQ for Valve Cover Repair
Q: What is the recommended torque when installing the engine valley cover bolts?
A:
You can tighten it to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What should you first remove when replacing the right side valve rocker arm cover?
A:
You should first remove the intake manifold cover.
By Bob
GM Specialist
01/11/2022
Q: What should you install if the PCV valve grommet has been removed from the rocker cover?
A:
You should install a NEW grommet during assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when tightening the rocker arm cover bolts?
A:
You can tighten the bolts to 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the valve rocker arm and push rod?
A:
The procedure is to remove the following: the rocker arm cover, the number one cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm pivot support, and the Pushrods.
Q: What is the removal procedure for the valve lifter oil filter?
A:
The procedure is to remove the following: the intake manifold, the oil pressure sensor and washer, the Valve Lifter oil filter, and the valve lifter oil filter O-ring seal.
Q: What is the removal procedure for the valve rocker arm and push rod?
A:
The procedure is to remove the following: the Rocker Arm cover, the number one cylinder spark plug, the rocker arm bolts, the rocker arms, the rocker arm pivot support, and the pushrods.