Part Description: 2009 GMC Sierra 1500 Engine Coolant Water Outlet W O Thermostat
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | All Trims | 8 Cyl 4.8L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 5.3L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 6.0L
2009 GMC Sierra 1500 | All Trims | 8 Cyl 6.2L
Show More
$9.15
FAQ for Thermostat Housing Repair
Q: What is the recommended torque when installing the water pump inlet bolts?
A:
You can tighten it to 15 Nm (11 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the engine coolant thermostat housing (LY2, LH6, LY5, LMG, LY6)?
A:
The procedure is to drain the cooling system, remove the air cleaner outlet duct, reposition the radiator outlet hose clamp at the water pump inlet, remove the radiator outlet hose, remove the water pump inlet bolts, remove the water pump inlet from the water pump and remove the water pump inlet seal.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the engine coolant fan motor (Non-HP2)?
A:
The procedure is to remove the following: the cooling blade(s), the Cooling Fan Motor bolts, and the cooling fan motor(s).
Q: What is the removal procedure for the radiator (4.3L, 4.8L, 5.3L, and 6.0L)?
A:
The procedure is to remove the following: the cooling fan and shroud, the Radiator outlet hose for the 4.3L engine, or the 4.8L, 5.3L, and 6.0L engines, the radiator bolts, and the radiator.
Q: How do you install the engine coolant thermostat?
A:
You can install the Thermostat and install the thermostat housing.