FAQ for Parking Brake Cable Repair
Q: What is the removal procedure for the parking brake cable guide?
A:
The procedure is to release the parking brake, raise the vehicle, remove the park brake cable guide bolt, remove the park brake cable guide and remove the park brake cable guide from the park brake cable.
By BobGM Specialist
02/11/2022 Q: What tool can be used to remove the park brake cable from the backing plate?
A:
You can use the J 37043.
By BobGM Specialist
02/11/2022 Q: How do you release the right park brake cable from the frame bracket?
A:
You can release the right park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit rearward.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the parking brake intermediate cable (JD9, JF3, JF7)?
A:
The procedure is to release the parking brake, disable the park brake cable, and automatic adjuster, raise the vehicle, disconnect the front park brake cable, disconnect the left park brake cable and the right park brake cable and remove the intermediate park brake cable.
By BobGM Specialist
02/11/2022 Q: How do you install the parking brake intermediate cable (JD9, JF3, JF7)?
A:
You can connect the left park brake cable and the right park brake cable to the equalizer bar, connect the front park brake cable to the intermediate cable connector, enable the park brake cable automatic adjuster and adjust the park brake.
By BobGM Specialist
02/11/2022 Q: What is the disabling procedure for the parking brake cable adjuster?
A:
The procedure is to raise the vehicle, hold the pedal in the FULL upward position, pull rearward on the front park brake cable, insert a thin tool on an upward angle through the hole in the front of the pedal assembly, release the cable and remove the component that requires service.
By BobGM Specialist
02/11/2022 Q: How do you release the left park brake cable from the frame bracket?
A:
You can release the left park brake cable from the frame bracket by compressing the locking tabs and pulling the cable conduit rearward.
By BobGM Specialist
02/11/2022 Q: How do you install the parking brake cable guide?
A:
You can install the park brake cable guide to the park brake cable, install the park brake cable guide, install the park brake cable guide bolt to the frame and lower the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque when installing the park brake cable clip bolt?
A:
You can tighten the bolt to 22 Nm (16 lb-ft).
By BobGM Specialist
02/11/2022 Q: What should you ensure when you insert the park brake cable conduit into the frame bracket?
A:
You should ensure the locking tabs on the cable conduit are fully engaged into the frame bracket.
By BobGM Specialist
02/11/2022 See more FAQs (6)