Part Description: 2009 GMC Sierra 1500 Booster Sensor
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | AT4, Base, Denali, Elevation, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$47.87MSRP: $90.34
You Save: $42.47 (48%)
FAQ for Oil Pressure Sensor Repair
Q: What is the removal procedure for the engine oil pressure sensor and/or switch?
A:
The procedure is to remove the intake manifold, disconnect the engine harness electrical connector, remove the oil pressure sensor and washer and remove the oil pressure sensor and washer.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when tightening the sensor?
A:
You can tighten the sensor to 35 Nm (26 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque when installing the oil level sensor in the oil pan?
A:
You can tighten the sensor to 20 Nm (15 lb-ft).
Q: What is the removal procedure for the accelerator pedal position sensor?
A:
The procedure is to remove the knee bolster, push down the small tab and disconnect the accelerator pedal position (APP) sensor electrical connector, remove the accelerator pedal bolts and remove the accelerator pedal.
Q: What should you clean before removal?
A:
You should clean the area around the camshaft position (CMP) sensor before removal to prevent debris from entering the engine.