< Back ×
My Vehicle Change Vehicle
2009 GMC Sierra 1500
< Back to View All
Warning Lights, Interior Lights & Other Lights
- Department
- Prices
OEM (Genuine) 2009 GMC Sierra 1500 License Lamp
PartNumber: 22794700
Product Specifications- Notes: W/Step Bumper
- Location: Driver Side; Passenger Side
- Other Names: License Lamp
- Item Dimensions: 3.0 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15082619, 15764374, 15805196, 12335772
- Part Description: 2009 GMC Sierra 1500 License Lamp
Vehicle Fitment- 2009 GMC Sierra 1500 | Base, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$25.99 MSRP:$39.22You Save: $13.23 (34%)
OEM (Genuine) 2009 GMC Sierra 1500 License Lamp
PartNumber: 22779876
Product Specifications- Notes: W/O Step Bumper
- Other Names: License Lamp
- Item Dimensions: 11.0 x 6.4 x 6.7 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15048278, 15154884
- Part Description: 2009 GMC Sierra 1500 License Lamp
Vehicle Fitment- 2009 GMC Sierra 1500 | Base, C3, Denali, HT, Hybrid, SL, SLE, SLT, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$155.83 MSRP:$235.10You Save: $79.27 (34%)
FAQ for License Plate Lights Repair
Q: What should you disconnect when replacing the Rear License Plate Lamp (VF7)?
A:
You should disconnect the electrical connector from the rear junction block.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear license plate lamp (Silverado)?
A:
The procedure is to ensure the headlamp switch is in the OFF position, reach under the rear bumper, press on the lens end of the cover, remove the lens housing from the bumper assembly and remove the bulb.
By Bob
GM Specialist
01/11/2022Q: How do you install the rear license plate lamp (Silverado)?
A:
You can install the bulb, install the rear edge of the lens housing into the rear bumper, push on the lens side of the housing and inspect the operation.
By Bob
GM Specialist
01/11/2022Q: How do you replace the rear license plate lamp bulb?
A:
You can reach under the rear bumper for the bulb socket, turn the bulb socket counterclockwise, pull the bulb socket out of the connector, pull the old bulb from the socket, and install the new bulb.
By Bob
GM Specialist
01/11/2022