Notes: 4.3 Liter, W/O AC; Silverado, Sierra Hybrid
Other Names: Idler Pulley, Serpentine Idler Pulley
Item Dimensions: 3.0 x 3.2 x 3.2 inches
Item Weight: 0.60 Pounds
Fitment Type: Direct Replacement
Replaces: 12556612
Part Description: 2009 GMC Sierra 1500 Serpentine Idler Pulley
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | Base, HT, Hybrid, SL, SLE, SLT, WT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L ELECTRIC/GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$48.00MSRP: $90.59
You Save: $42.59 (48%)
FAQ for Idler Pulley Repair
Q: What is the removal procedure for the drive belt idler pulley?
A:
The procedure is to remove the accessory drive belt, loosen the drive belt idler pulley bolt and remove the idler pulley.
By Bob
GM Specialist
01/11/2022
Q: How do you install the drive belt idler pulley?
A:
You can position the drive belt idler pulley to the generator bracket, tighten the idler pulley bolt finger tight, tighten the drive belt idler pulley bolt and install the accessory drive belt.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the drive belt tensioner?
A:
The procedure is to remove the following: the drive belt, the drive Belt Tensioner bolts, and the drive belt tensioner.
Q: What is the removal procedure for the camshaft position actuator solenoid valve?
A:
The procedure is to install the J 42386-A and bolts, remove the Camshaft position (CMP) actuator magnet, remove the CMP actuator solenoid valve and discard the solenoid valve.
Q: How do you install the air conditioning compressor belt (V8)?
A:
You can install the belt installation tool onto the balancer, install the belt onto the belt installation tool, install the skid plate and install the accessory Drive Belt.