Part Description: 2009 GMC Sierra 1500 Crankshaft Position Sensor
More Info
Vehicle Fitment
2009 GMC Sierra 1500 | All Trims | 6 Cyl 4.3L
$21.34
FAQ for Crankshaft Position Sensor Repair
Q: What is the recommended torque when installing the CKP sensor bolt?
A:
You can tighten it to 25 Nm (18 lb-ft).
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the crankshaft position sensor?
A:
The procedure is to remove the starter, disconnect the engine wiring harness electrical connector, clean the area around the CKP sensor, remove the CKP sensor bolt and remove the CKP sensor.
By Bob
GM Specialist
29/10/2022
Q: What should you release while the learning procedure is in progress?
A:
You should release the throttle immediately when the engine starts to decelerate.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the engine oil pressure sensor and/or switch?
A:
The procedure is to remove the intake manifold, disconnect the engine harness electrical connector, remove the Oil Pressure Sensor and washer and remove the oil pressure sensor and washer.
Q: What is the recommended torque when installing the oil level sensor in the oil pan?
A:
You can tighten the sensor to 20 Nm (15 lb-ft).
Q: What is the removal procedure for the accelerator pedal position sensor?
A:
The procedure is to remove the knee bolster, push down the small tab and disconnect the accelerator pedal position (APP) sensor electrical connector, remove the accelerator pedal bolts and remove the accelerator pedal.