FAQ for Pillar Panels Repair
Q: How do you install the rear floor trim plate?
A:
You can install the rear floor trim plate to the vehicle and position the rear floor trim plate and press down.
By BobGM Specialist
02/11/2022 Q: How do you install the body hinge pillar trim panel?
A:
You can install the hinge pillar trim panel to the vehicle and align the locator pins.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the rear floor trim plate?
A:
The procedure is to grasp and gently pull up on the rear floor trim plate, remove the rear floor trim plate from the vehicle ad inspect the rear floor trim plate for broken or missing retaining clips.
By BobGM Specialist
02/11/2022 Q: What should you remove before replacing the lower pillar garnish molding?
A:
You should remove the front door upper pillar garnish molding.
By BobGM Specialist
02/11/2022 Q: How do you install the body rear corner trim panel (right side)?
A:
You can install the passenger side rear corner trim panel to the vehicle, align the tabs at the front of the passenger side rear corner trim panel and press the passenger side rear corner trim panel at the rear.
By BobGM Specialist
02/11/2022 Q: How do you install the body side protector?
A:
You can install the passenger side body side protector to the vehicle, install the driver side body side rear protector to the vehicle, install the driver side body side front protector to the vehicle and install the retainers to the body side protectors.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the windshield garnish molding?
A:
The procedure is to remove the passenger side assist handle, grasp and gently pull the windshield garnish molding, release the lower retainer, remove the windshield garnish molding and inspect the windshield garnish molding for broken or missing retaining clips.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the body hinge pillar trim panel?
A:
The procedure is to gently pull the hinge pillar trim panel, remove the hinge pillar trim from the vehicle and inspect the hinge pillar trim panel for broken or missing retaining clips.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the body side trim panel (left side)?
A:
The procedure is to remove the rear passenger seats, remove the front door lower pillar garnish molding, remove the body side trim panel and inspect the body side front lower trim panel for broken or missing retaining clips.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the body side rear garnish molding?
A:
The procedure is to open the cover and remove the screw, pull out the center pillar garnish molding and remove the center pillar garnish molding.
By BobGM Specialist
02/11/2022 See more FAQs (53)