Part Description: 2009 GMC Savana 3500 Manifold-Center Intake
More Info
Vehicle Fitment
2009 GMC Savana 3500 | Base | 8 Cyl 6.6 L DIESEL
FAQ for Intake Manifold Repair
Q: How do you install the engine block valley cover?
A:
You can install the O-ring seals, the cover, the gasket, the bolts, the oil pressure sensor, the sealing washer, and the intake manifold.
By Bob
GM Specialist
01/11/2022
Q: What is the first step of the removal procedure for the intake manifold?
A:
The first step is to remove the throttle body.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the engine block valley cover?
A:
The procedure is to remove the following: the intake manifold, the valley cover bolts, the valley cover and gasket, the O-ring seals, and the oil pressure sensor and washer.
By Bob
GM Specialist
01/11/2022
Q: How do you remove the evaporative emission (EVAP) purge solenoid vent tube?
A:
You can remove the EVAP tube end from the solenoid, squeeze the EVAP pipe quick connect fitting and remove the EVAP tube end from the vapor pipe.
Q: What is the removal procedure for the air cleaner element?
A:
The procedure is to unclip the Air Filter cover, lift and rotate the top cover of the air cleaner housing, pull out the air filter element, and inspect the air filter element for dust, dirt, or water.
Q: How do you install the manifold absolute pressure sensor?
A:
You can install the MAP Sensor to the upper intake manifold, connect the MAP sensor electrical connector and install the engine cover.