FAQ for Hvac Control Module Repair
Q: What should you remove before replacing the vacuum pump assembly?
A:
You should remove the primary battery tray.
By BobGM Specialist
01/11/2022 Q: How do you install the heater and air conditioning control vacuum pump?
A:
You can install the vacuum pump to the vehicle, install the vacuum pump retaining bolts, connect the vacuum hose to the vacuum pump, connect the vacuum pump electrical connector and install the air cleaner.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the heater and air conditioning control vacuum pump?
A:
The procedure is to remove the air cleaner, disconnect the vacuum pump electrical connector, disconnect the vacuum hose from the vacuum pump, remove the vacuum pump retaining bolts and remove the vacuum pump from the vehicle.
By BobGM Specialist
01/11/2022 Q: How do you install a new HVAC control knob?
A:
You can align the flat edge of the knob retainer with the flat on the post and push the knob onto the post.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the heater and air conditioning control?
A:
The procedure is to remove the I/P cluster trim plate, remove the retaining screw, pivot the HVAC control assembly, disconnect the electrical connector, disconnect the vacuum connector and remove the HVAC control assembly.
By BobGM Specialist
01/11/2022 Q: How do you install the heater and air conditioning control?
A:
You can install the HVAC control assembly, install the retaining screw to the HVAC control assembly and install the I/P cluster trim plate.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the retaining nuts to the underside of the auxiliary HVAC module?
A:
You can tighten it to 10 Nm (89 lb in).
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the auxiliary HVAC module?
A:
The first step is to recover the refrigerant.
By BobGM Specialist
01/11/2022 See more FAQs (3)