FAQ for Door Seal Repair
Q: What should you ensure when installing the rear door opening weatherstrip?
A:
You should ensure that the corners have not been pulled away from the body.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear door opening weatherstrip?
A:
The procedure is to remove the following: the rear corner garnish molding, the driver side body side rear trim panel, the passenger side rear corner trim panel, the rear floor trim plate, and the rear door opening frame garnish molding.
By BobGM Specialist
01/11/2022 Q: How do you install the intermediate side door check seal?
A:
You can apply weatherstrip adhesive to the check strap seal and install the side rear door check strap seal to the door.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the intermediate side door check seal?
A:
The procedure is to remove the side front door check the strap seal from the door and clean the side rear door of all of the old adhesive.
By BobGM Specialist
01/11/2022 Q: What is the first step of the removal procedure for the front door opening weatherstrip?
A:
The first step is to remove the hinge pillar trim panel.
By BobGM Specialist
01/11/2022 Q: What is the first step of the removal procedure for the front side door upper hinge and lower hinge?
A:
The first step is to remove the sealer that surrounds the hinge.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when tightening the bolts?
A:
You can tighten it to 5 Nm (44 lb in).
By BobGM Specialist
01/11/2022 Q: What should you apply to the channel on the weatherstrip?
A:
You should apply GM P/N 12345097 (Canadian P/N 10953479) or the equivalent, into the channel on the weatherstrip.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front side door roof drip weatherstrip?
A:
The procedure is to remove the weatherstrip from the roof rail and remove the weatherstrip retainers from the holes in the roof rail.
By BobGM Specialist
01/11/2022 Q: What should you remove before replacing the intermediate side door weatherstrip?
A:
You should remove the weatherstrip from the top of the door, pull the weatherstrip rearward releasing to the retainer, remove the weatherstrip and the retainers and clean the door of all of the old adhesive and retainers.
By BobGM Specialist
01/11/2022 See more FAQs (8)