Other Names: Door Jamb Switch, Jamb Switch, Lamp Switch, Switch
Item Dimensions: 3.1 x 2.1 x 2.1 inches
Item Weight: 0.30 Pounds
Fitment Type: Direct Replacement
Replaces: 15686635
Part Description: 2009 GMC Savana 3500 Jamb Switch
More Info
Vehicle Fitment
2009 GMC Savana 3500 | Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
$10.75MSRP: $16.20
You Save: $5.45 (34%)
FAQ for Door Contact Switch Repair
Q: What is the removal procedure for the sliding door jamb contact plate?
A:
The procedure is to remove the rivets that retain the contact plate to the door jamb, remove the contact plate from the door jamb and disconnect the electrical connector from the contact plate.
By Bob
GM Specialist
01/11/2022
Q: How do you install the sliding door jamb contact plate?
A:
You can connect the electrical connector to the contact plate, install the contact plate to the door jamb and install the rivets that retain the contact plate to the door jamb with a rivet gun.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the rear side door check strap?
A:
The procedure is to open the door approximately halfway, pull the side Door Check strap toward the inside of the door, swing the door open, remove the fasteners and remove the side door check strap.
Q: What is the removal procedure for the door lock cylinder?
A:
The procedure is to remove the following: the front door panel, the front door water deflector, the front Door Lock Cylinder retainer, the front door lock cylinder, and the lock cylinder rod.
Q: What is the removal procedure for the door lock switch?
A:
The procedure is to remove the front door trim plate, remove the electrical connector, release the retaining tabs on the power Door Lock Switch and remove the power door lock switch.