FAQ for Door Check Repair
Q: What is the recommended torque when installing the nuts retaining the door link to the door?
A:
You can tighten it to 11 Nm (97 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear side door check strap?
A:
The procedure is to open the door approximately halfway, pull the side door check strap toward the inside of the door, swing the door open, remove the fasteners and remove the side door check strap.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front side door check strap?
A:
The procedure is to open the door approximately halfway, pull the side door check strap, swing the door open, remove the fasteners that retain the side door check strap to the door pillar and remove the side door check strap from the door.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the rear side door center track bumper?
A:
The procedure is to remove the following: the passenger side body side trim panel, the nut that retains the sliding door stop to the body, and the sliding door stop.
By BobGM Specialist
01/11/2022 Q: How do you install the front side door check strap?
A:
You can install the side door check strap into the door, hook the strap to the pin inside of the door and install the fasteners.
By BobGM Specialist
01/11/2022 Q: How do you install the rear side door check?
A:
You can install the check assembly to the sliding side door lower track, install the nuts retaining the check assembly to the sliding side door lower track and install the side door stepwell mat.
By BobGM Specialist
01/11/2022 Q: How do you install the front side door check strap seal?
A:
You can apply weatherstrip adhesive to the check strap seal and install the side front door check strap seal to the door.
By BobGM Specialist
01/11/2022 Q: How do you install the rear side door center track bumper?
A:
You can install the sliding door stop to the vehicle, install the nut and install the passenger side body side trim panel.
By BobGM Specialist
01/11/2022 Q: How do you install the rear side door check strap?
A:
You can install the side door check strap into the door, hook the strap to the pin inside of the door and install the fasteners.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front side door check link?
A:
The procedure is to remove the front door trim panel, remove the front door water deflector, remove the bolts that retain the door link to the door jamb, remove the nuts that retain the door link to the door, and remove the door link from the door.
By BobGM Specialist
01/11/2022 See more FAQs (9)