FAQ for Battery Cables Repair
Q: What should you ensure when installing the positive cable to the vehicle on all models?
A:
You should ensure the cable is routed correctly and installed in the retainer clips.
By BobGM Specialist
01/11/2022 Q: What is the first step of the removal procedure for the battery negative cable (With LY2, LMF, or LY6) (4.8L, 5.3L, 6.0L)?
A:
The first step is to disconnect the battery negative cable from the battery on all models.
By BobGM Specialist
01/11/2022 Q: What is the first step of the removal procedure for the battery positive cable (With LY2, LME, or LY6) (4.8L, 6.0L)?
A:
The first step is to remove the bolt retaining the coolant recovery reservoir or surge tank on all models.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the battery-positive cable extension cable junction block?
A:
The procedure is to remove the following: the positive extension cable nut from the junction block, the air cleaner assembly, the air cleaner outlet duct, the positive extension cable nut from the intake air heater, the battery positive cover, the positive extension cable nut from the UBEC terminal stud and the positive extension cable.
By BobGM Specialist
01/11/2022 Q: What is the first step for installing the battery positive cable extension cable junction block?
A:
The first step is to position the positive extension cable and connect the wiring harness clips.
By BobGM Specialist
01/11/2022