Part Description: 2009 GMC Savana 2500 Seal, Valve Stem Oil
More Info
Vehicle Fitment
2009 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
$13.06
FAQ for Valve Stem Oil Seal Repair
Q: How should you install the valve keys properly?
A:
Use grease to hold the valve keys in place, make sure the keys seat properly in the groove of the valve stem, release the valve spring pressure, make sure the valve keys stay in place, remove the J 38606, and tap the end of the valve stem with a plastic faced hammer to seat the keys.
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be used in the replacement of the Valve Stem Oil Seal and Valve Spring?
A:
J22794 Spark Plug Port Adapter, J 38606 Valve Spring Compressor, J 42078 Valve Stem Oil Seal Installer.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Valve Rocker Arm and Push Rod?
A:
The procedure is to remove the valve rocker arm cover, the valve rocker arm bolts, the valve rocker arms, the valve rocker arm pivot support, and the Pushrods, and clean and inspect the valve rocker arms and pushrods.
Q: What should be noted when reusing valve lifters?
A:
When reusing Valve Lifters, you need to install the lifters in their original locations.
Q: What should be noted when using Valve Springs?
A:
You should note that Valve Springs can be tightly compressed. Use care when removing retainers and plugs.