2009 GMC Savana 2500 Turn Signal Lights

The procedure is to push the light assembly towards the front of the vehicle while prying the rear edge of the light assembly away from the fender with a small flat-bladed tool to remove the light assembly, remove the bulb and socket from the light assembly by turning the socket 1/4 turn counterclockwise, and remove the bulb from the socket.

You need to install the bulb into the socket, turn the socket 1/4 turn clockwise to install the socket into the light assembly, hook the front tab on the lens into the fender and press the light assembly retaining clip into the fender until fully seated.

It has a total of 2 forward lamp harness electrical connectors.