FAQ for Pillar Panels Repair
Q: How do you install the Body Rear Corner Trim Panel-Right Side?
A:
You need to install the passenger side rear corner trim panel, align the tabs at the front of the passenger side rear corner trim panel, and press the passenger side rear corner trim panel at the rear to engage the retaining clips.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Body Side Protector?
A:
The procedure is to remove the retainers from the body side protectors, the driver side body side front protector, the driver side body side rear protector, and remove the passenger side body side protector.
By BobGM Specialist
02/11/2022 Q: How do you install the Center Pillar Upper Garnish Molding-Right Side?
A:
You need to install the center pillar upper pillar garnish molding, align the retainers to the body and press the center pillar garnish molding to engage the retaining, install the screw, and the front seat belt to the front seat belt height adjuster.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for Windshield Garnish Molding?
A:
The procedure is to remove the passenger side assist handle, pull the windshield garnish molding to release the clips, release the lower retainer, and remove the windshield garnish molding, inspect the windshield garnish molding for broken or missing retaining clips. Replace the windshield garnish molding or clips as needed.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Body Hinge Pillar Trim Panel?
A:
The procedure is to pull the hinge pillar trim panel to release the retaining clips, remove the hinge pillar trim, inspect the hinge pillar trim panel for broken or missing retaining clips, and replace the retaining clips as needed.
By BobGM Specialist
02/11/2022 Q: What is the replacement procedure for the Roof Side Rail Garnish Molding-Left Side?
A:
The procedure is to pull the upper garnish molding away from the body to disengage the integral clips and disconnect the tether clip from the molding.
By BobGM Specialist
02/11/2022 Q: How many push-in retainers does Lower Pillar Garnish Molding have?
A:
It has a total of 2 push-in retainers.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Rear Door Upper Garnish Molding?
A:
The procedure is to remove the body rear corner garnish molding, pull the rear door opening frame garnish molding down to disengage the retaining clips, remove the rear door opening frame garnish molding, inspect the rear door opening frame garnish molding for broken or missing retaining clips. Replace the clips as needed.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Body Rear Corner Trim Panel-Right Side?
A:
The procedure is to pull the rear of the passenger side rear corner trim panel to disengage the retaining clips, remove the passenger side rear corner trim panel, and inspect the passenger side rear corner trim panel for broken or missing retaining clips. Replace the clips as needed.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the Body Side Trim Panel-Left Side?
A:
The procedure is to remove the rear passenger seats as needed, the front door lower pillar garnish molding, pull the body side front lower trim panel to disengage the clips, remove the body side trim panel, inspect the body side front lower trim panel for broken or missing retaining clips. Replace the retaining clips as needed.
By BobGM Specialist
02/11/2022 See more FAQs (36)