Part Description: 2009 GMC Savana 2500 Manifold-Center Intake
More Info
Vehicle Fitment
2009 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
FAQ for Intake Manifold Repair
Q: What is the recommended torque for the EVAP purge solenoid bolt?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022
Q: How do you remove the evaporative emission (EVAP) purge solenoid vent tube?
A:
First, remove the EVAP tube end (2) from the solenoid. next, squeeze the EVAP pipe quick-connect the fitting retainer together. and, remove the EVAP tube end from the vapor pipe.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the manifold bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed when cleaning the Throttle Body?
A:
Do not insert any tools into the Throttle Body bore to avoid damage to the throttle valve plate.
Q: How do you install the Air Cleaner Element?
A:
You need to install the Air Filter element into the air cleaner housing and rotate and install the top cover to the air cleaner housing.
Q: How do you install the Manifold Absolute Pressure Sensor?
A:
You need to install the MAP Sensor to the upper intake manifold, connect the MAP sensor electrical connector, and install the engine cover.