Part Description: 2009 GMC Savana 2500 No Slack Light Duty Idler Tensioner Pulley
More Info
Vehicle Fitment
2009 GMC Savana 2500 | All Trims | 8 Cyl 6.6L
$15.70
FAQ for Idler Pulley Repair
Q: What is the recommended torque for the drive belt idler pulley bolt?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: How do you install the Drive Belt Idler Pulley?
A:
You need to install the drive belt idler pulley and bolt to the generator bracket, snug the bolt finger tight, install the drive belt, and tighten the drive belt idler pulley bolt.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed when installing the camshaft sprocket?
A:
The sprocket teeth and Timing Chain must mesh. the camshaft and the crankshaft sprocket alignment marks MUST be aligned properly.
Q: What is the removal procedure for the Drive Belt Tensioner - Accessory?
A:
The procedure is to remove the accessory drive belt, the drive Belt Tensioner bolts, and the drive belt tensioner.
Q: What should be done when camshaft replacement is required?
A:
If Camshaft replacement is required, the valve lifters must also be replaced.