FAQ for Hvac Control Module Repair
Q: What is the removal procedure for the Heater and Air Conditioning Control Vacuum Pump?
A:
The procedure is to remove the air cleaner, disconnect the vacuum pump electrical connector, disconnect the vacuum hose from the vacuum pump, remove the vacuum pump retaining bolts, and remove the vacuum pump.
By BobGM Specialist
01/11/2022 Q: How do you install the Heater and Air Conditioning Control Vacuum Pump?
A:
You need to install the vacuum pump, and the vacuum pump retaining bolts, connect the vacuum hose to the vacuum pump, connect the vacuum pump electrical connector, and install the air cleaner.
By BobGM Specialist
01/11/2022 Q: How many rubber retainers does Vacuum Pump Assembly have?
A:
It has a total of 3 rubber retainers.
By BobGM Specialist
01/11/2022 Q: How do you install the Auxiliary Heater and Air Conditioning Control - Rear?
A:
You need to install the HVAC control assembly in the front headliner and attach the bezel, connect the electrical connectors, and install the front headliner.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the retaining nuts to the underside of the auxiliary HVAC module?
A:
The recommended torque is 10 Nm (89 lb in).
By BobGM Specialist
01/11/2022 Q: How do you install the Auxiliary HVAC Control Processor?
A:
You need to install the HVAC control processor to the HVAC processor case, install the HVAC control processor access cover, the HVAC control processor to the roof panel, and the front headliner.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Heater and Air Conditioning Control?
A:
Remove the I/P cluster trim plate, and the retaining screw from the HVAC control assembly, pivot the HVAC control assembly to disengage the locking tab on the right side, disconnect the electrical connectors, disconnect the vacuum connector, and remove the HVAC control assembly.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the one retaining nut to the auxiliary evaporator underbody rear tube assembly to the core?
A:
The recommended torque is 28 Nm (21 lb-ft).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the Front Auxiliary Heater and Air Conditioning Control?
A:
The procedure is to remove the front control switch bezel from the headliner, remove the front control switch by unsnapping the retainers from the headliner, and disconnect the electrical connector.
By BobGM Specialist
01/11/2022 See more FAQs (4)