FAQ for Driveshaft Repair
Q: Why does the shuddering noise occur?
A:
When the vehicle is accelerating at low speed, a shudder occurs.
By BobGM Specialist
29/10/2022 Q: Why does the squeaking sound occur?
A:
When driving the vehicle at various speeds, a squeaking sound occurs.
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the yoke retainers and the bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By BobGM Specialist
29/10/2022 Q: What kind of special tools will be used in the replacement of the Propeller Shaft Boot?
A:
J43218 Clamp Pliers-Narrow Jaw.
By BobGM Specialist
29/10/2022 Q: How do you install the One-Piece Propeller Shaft?
A:
You need to install the propeller shaft in the transfer case, remove the tape from the U-Joint, align the reference marks, install the propeller shaft in the yoke, and install the U-Joint retainers and the retaining bolts.
By BobGM Specialist
29/10/2022 Q: What should be noted when removing the tape from the propeller shaft U-Joint?
A:
You should ensure that the alignment marks on the U-Joint and the yoke are aligned for proper installation.
By BobGM Specialist
29/10/2022 Q: What kind of special tools will be used in the replacement of the Drive/Propeller Shaft?
A:
J9522-3 U-Joint Bearing Separator, J 9522-5 U-Joint Bearing Spacer Remover, J 43218 Clamp Pliers Narrow Jaw.
By BobGM Specialist
29/10/2022 Q: Why does Knock or Clunk Noise occur?
A:
Knocking or clunking noise occurs when operating the vehicle in high gear or coasting in neutral at 16 km/h (10 mph).
By BobGM Specialist
29/10/2022 Q: What is the recommended torque for the propeller shaft hanger bolts?
A:
The recommended torque is 52 Nm (38 lb-ft).
By BobGM Specialist
29/10/2022 Q: What should you do before beginning the diagnosis of the Propeller Shaft?
A:
Before beginning diagnosis, review the system description and operation to familiarize yourself with the system function.
By BobGM Specialist
29/10/2022 See more FAQs (10)