Part Description: 2009 GMC Savana 2500 Differential Bearing
Vehicle Fitment
2009 GMC Savana 2500 | All Trims | All Engines
FAQ for Differential Bearing Repair
Q: What should you do if replacing the left side seal?
A:
You need to disconnect the wheel drive shaft from the inner shaft flange and set it aside, remove the inner shaft, the inner shaft seal cover bolts, and the inner shaft seal cover assembly.
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be required in the replacement of the Front Drive Axle Inner Shaft Seal and Inner Shaft Bearing?
A:
J2619-01 Slide Hammer, J 29369-1 Bushing and Bearing Remover, J 42211 Axle Bearing Installer, J 42738 Seal Installer, J 8092 Universal Driver Handle-3/4 in -10.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: Why does the universal joint noise occur?
A:
One or more of the Universal Joints are worn or damaged, or they have lost lubricant, or the yoke retainer strap bolts are loose.
Q: What should be noticed when removing the axle shaft?
A:
When removing the Axle Shaft, do not rotate the shaft. Rotating the shaft will misalign the gears. Misaligned gears will make the assembly difficult.
Q: What is the removal procedure for the Front Axle Lubricant?
A:
The procedure is to clean the area around the front axle fill plug and the drain plug, remove the fill plug and the drain plug, and drain the fluid from the front Differential carrier assembly.