< Back ×
My Vehicle Change Vehicle
2009 GMC Savana 2500
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2009 GMC Savana 2500 Camshaft
PartNumber: 12625439
Product Specifications- Notes: Express, Savana; 6.0l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.6 inches
- Item Weight: 14.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12612274
- Part Description: 2009 GMC Savana 2500 Camshaft
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$348.34 MSRP:$576.58You Save: $228.24 (40%)OEM (Genuine) 2009 GMC Savana 2500 Camshaft
PartNumber: 12689035
Product Specifications- Notes: Express, Savana; 4.8l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.3 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593205, 12625437
- Part Description: 2009 GMC Savana 2500 Camshaft
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS
$300.01 MSRP:$496.57You Save: $196.56 (40%)OEM (Genuine) 2009 GMC Savana 2500 Camshaft
PartNumber: 98077453
Product Specifications- Notes: Express, Savana
- Item Dimensions: 22.2 x 2.5 x 2.5 inches
- Item Weight: 12.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97211770
- Part Description: 2009 GMC Savana 2500 Camshaft
Vehicle Fitment- 2009 GMC Savana 2500 | Base | 8 Cyl 6.6 L DIESEL
FAQ for Camshaft Repair
Q: Can you reuse the valve in the installation?
A:
No, do not use the CMP solenoid valve again. Install a new valve during assembly.
By Bob
GM Specialist
29/10/2022Q: What kind of special tools will be used in the replacement of the Camshaft Position Actuator?
A:
EN 46330 Timing Belt Tensioner Retaining Pin, J 45059 Angle Meter.
By Bob
GM Specialist
29/10/2022Q: What should be done when camshaft replacement is required?
A:
If camshaft replacement is required, the valve lifters must also be replaced.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Camshaft Position Actuator Magnet?
A:
The procedure is to remove the water pump, disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet, remove the CMP actuator magnet bolts and magnet, and remove and discard the CMP actuator magnet gasket.
By Bob
GM Specialist
29/10/2022Q: What kind of special tools will be used in the replacement of the Camshaft?
A:
EN 46330 Timing Belt Tensioner Retaining Pin.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the J 42386-A bolts?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the CMP actuator solenoid valve of a first pass?
A:
The recommended torque is 65 Nm (48 lb-ft).
By Bob
GM Specialist
29/10/2022See more FAQs (2)