< Back ×
My Vehicle Change Vehicle
2009 GMC Savana 2500
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2009 GMC Savana 2500 Side Sensor
PartNumber: 13502578
Product Specifications- Notes: Express, Savana; All
- Item Dimensions: 2.6 x 1.7 x 1.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Savana 2500 Side Sensor
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2009 GMC Savana 2500 Side Impact Sensor
PartNumber: 20919984
Product Specifications- Other Names: Side Impact Sensor
- Item Dimensions: 2.2 x 2.1 x 1.6 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85668899
- Part Description: 2009 GMC Savana 2500 Side Impact Sensor
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$165.03 MSRP:$248.98You Save: $83.95 (34%)OEM (Genuine) 2009 GMC Savana 2500 Side Impact Sensor
PartNumber: 20919985Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor
- Item Dimensions: 4.3 x 2.3 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15281885
- Part Description: 2009 GMC Savana 2500 Side Impact Sensor
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$162.58 MSRP:$255.70You Save: $93.12 (37%)
Dorman® OE Solutions Air Bag Impact Sensor for 2009 GMC Savana 2500
PartNumber: 590-231Product Specifications- Notes: w/RPO Code AJ3 (Front Seat Air Bags); w/RPO Code AK5 (Driver & Passenger Front Seat Air Bags); Mounted to Lower Tie Bar
- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 20919987
- Package Quantity: 1
- UPC: 885484445017
- Part Description: 2009 GMC Savana 2500 OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2009 GMC Savana 2500 | All Trims | All Engines
OEM (Genuine) 2009 GMC Savana 2500 Side Impact Sensor
PartNumber: 20919986Product Specifications- Notes: Rear
- Location: Driver Side
- Other Names: Side Impact Sensor
- Item Dimensions: 3.4 x 2.1 x 2.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15281886
- Part Description: 2009 GMC Savana 2500 Side Impact Sensor
Vehicle Fitment- 2009 GMC Savana 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Air Bag Sensor Repair
Q: What should be replaced after a collision involving airbag deployment?
A:
You need to replace the inflatable restraint I/P module, inflatable restraint steering wheel module, inflatable restraint SDM, inflatable restraint front end sensor, left/right, and inflatable restraint seat belt pre-tensioners.
By Bob
GM Specialist
01/11/2022Q: What is the replacement procedure for the Instrument Panel Inflatable Restraint Module Switch?
A:
Squeeze the retaining tabs on the back of the switch and push the switch out of the cluster trim bezel assembly.
By Bob
GM Specialist
01/11/2022Q: What is the replacement procedure for the Inflatable Restraint Roof Side Rail Module (without YA2)?
A:
The procedure is to disconnect the electrical connector, loosen the roof side rail inflatable restraint module bolts, remove the push-in retainers, and remove the roof side rail inflatable restraint module.
By Bob
GM Specialist
01/11/2022Q: How do you install the Inflatable Restraint Front End Sensor?
A:
You need to remove any dirt, grease, or other impurities from the mounting surface, point the arrow on the sensor toward the front of the vehicle, install the inflatable restraint front-end sensor into the keyhole slot in the lower radiator support, push the sensor towards the rear of the vehicle to seat the sensor in the keyhole slot in the lower radiator support, connect the inflatable restraint front end sensor electrical connector, and install the CPA to the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the replacement procedure for the Inflatable Restraint Side Impact Sensor- Front?
A:
The procedure is to disconnect the electrical connector, loosen the side impact inflatable restraint sensor bolts, and remove the side impact inflatable restraint sensor.
By Bob
GM Specialist
01/11/2022Q: How many nuts does Inflatable Restraint Vehicle Rollover Sensor have?
A:
It has a total of 3 inflatable restraint rollover sensor nuts.
By Bob
GM Specialist
01/11/2022Q: What is the disabling procedure for the Negative Battery Cable?
A:
Turn the steering wheel so that the wheels of the vehicle are pointing straight ahead, place the ignition in the OFF position, disconnect the negative battery cable from the battery, and wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the SDM mounting nuts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
28/10/2022See more FAQs (3)