FAQ for A/C Hose Repair
Q: What kind of special tools will be used in the replacement of the Air Conditioning Evaporator Front Tube?
A:
J39400-A Halogen Leak Detector.
By BobGM Specialist
28/10/2022 Q: What kind of special tools will be required in the replacement of the Auxiliary Air Conditioning Evaporator Tube with an Auxiliary Heater Inlet and Outlet Pipe?
A:
J38185 Hose Clamp Pliers.
By BobGM Specialist
28/10/2022 Q: What is the recommended torque for the auxiliary a/c evaporator nut?
A:
The recommended torque is 16 Nm (12 lb-ft).
By BobGM Specialist
28/10/2022 Q: What is the replacement procedure for the Auxiliary Air Conditioning Evaporator and Auxiliary Heater Hose-Intermediate (Gasoline)?
A:
The procedure is to recover the refrigerant from the system, drain the cooling system, remove the lower fan shroud, remove the exhaust tailpipe heat shield, loosen the driver-side body mount bolts, lift the passenger side of the body off the frame and support, and release the radiator hose clamp.
By BobGM Specialist
28/10/2022 Q: What kind of special tools will be used in the replacement of the Auxiliary Heater and Air Conditioning Pipe?
A:
J41425 A/C Line Repair Kit.
By BobGM Specialist
28/10/2022 Q: What is the recommended torque when installing the discharge hose to the compressor bolt?
A:
The recommended torque is 35 Nm (26 lb-ft).
By BobGM Specialist
28/10/2022 Q: What is the recommended torque when installing the evaporator inlet hose nut to the front evaporator tube?
A:
The recommended torque is 6 Nm (12 lb-ft).
By BobGM Specialist
28/10/2022 Q: What kind of special tools will be required in the replacement of the Air Conditioning Evaporator Tube-Outlet (C69)?
A:
J39400-A Halogen Leak Detector.
By BobGM Specialist
28/10/2022 Q: What is the removal procedure for the Air Conditioning Evaporator Tube-Outlet (C69)?
A:
The procedure is to recover the refrigerant from the system, the engine cover, the auxiliary evaporator outlet tube from the compressor hose, the retaining nut from the engine, the auxiliary evaporator tube retaining nuts from the body, the bolt retaining the auxiliary evaporator outlet tube to the transmission bracket, the auxiliary evaporator outlet tube from the auxiliary evaporator, and remove the evaporator tube.
By BobGM Specialist
28/10/2022 Q: What should be ensured when sectioning the rear A/C or heater lines?
A:
When you section the rear A/C or heater lines, ensure that the correct minimum length remains in the straight part of the line on both sides of the splice.
By BobGM Specialist
28/10/2022 See more FAQs (6)