< Back ×
My Vehicle Change Vehicle
2009 GMC Envoy
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 GMC Envoy Adjust Switch
PartNumber: 12451439
Product Specifications- Notes: Driver Seat, W/Power, Seat Adjuster, All; Driver Seat; Bravada/Envoy/Trailblazer
- Location: Driver Side
- Item Dimensions: 7.2 x 7.2 x 6.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89043625
- Part Description: 2009 GMC Envoy Adjust Switch
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$112.05 MSRP:$169.02You Save: $56.97 (34%)
OEM (Genuine) 2009 GMC Envoy Lumbar Switch
PartNumber: 19121422
Product Specifications- Notes: Passenger Seat, W/Power, Lumbar Adjust, All; Driver Seat, W/Power, Lumbar, 2-Way
- Location: Passenger Side; Driver Side
- Other Names: Control Switch, Lumbar Switch, Seat Switch, Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 GMC Envoy Lumbar Switch
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$67.93 MSRP:$106.81You Save: $38.88 (37%)
OEM (Genuine) 2009 GMC Envoy Switch, Passenger Seat Adjuster & Reclining
PartNumber: 12451440
Product Specifications- Notes: Passenger Seat, W/Power, Seat Adjust; Passenger Seat
- Location: Passenger Side
- Item Dimensions: 4.2 x 4.0 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89042262
- Part Description: 2009 GMC Envoy Switch, Passenger Seat Adjuster & Reclining
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
FAQ for Power Seat Switch Repair
Q: What is the recommended torque for the bolt when installing the seat belt buckle assembly to the seat adjuster?
A:
The recommended torque is 55 Nm (41 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nuts when installing the seat position switch to the seat adjuster?
A:
The recommended torque is 24 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Rear Seat Number 1 Cushion Latch Release Assembly?
A:
Remove the rear seat cushion assembly, the rear seat cushion cover and the pad, the strap from the rear seat cushion latch, and the 3 bolts securing the rear seat cushion latch to the seat pan.
By Bob
GM Specialist
01/11/2022Q: How do you install the Driver Seat Adjuster Memory Switch?
A:
You need to position the memory seat switch to the lock and door lock and side window switch, connect the electrical connector to the memory seat switch and install the door lock and side window switch.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Front Seat Lumbar Control Switch?
A:
Remove the switch bezel assembly from the seat, the power seat switch, release the tabs that retain the lumbar switch to the switch bezel assembly, disconnect the electrical connector from the lumbar switch, and remove the lumbar switch from the switch bezel assembly.
By Bob
GM Specialist
01/11/2022Q: What should be done after replacing a memory seat module or adjuster components?
A:
It may be necessary to reset the adjuster motor soft stop locations after that.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Power Seat Switch?
A:
Remove the switch bezel assembly from the seat assembly, and the buttons from the switch, release the tabs that retain the seat switch to the seat bezel assembly, disconnect the electrical connector from the switch, and remove the seat switch from the seat bezel assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (2)