< Back ×
My Vehicle Change Vehicle
2009 GMC Envoy
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2009 GMC Envoy Latch
PartNumber: 25775905
Product Specifications- Notes: Chevrolet & GMC
- Other Names: Latch, Lock
- Item Dimensions: 5.8 x 5.7 x 2.5 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15135072, 15955509, 15233704
- Part Description: 2009 GMC Envoy Latch
Vehicle Fitment- 2009 GMC Envoy | Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
$57.94 MSRP:$87.42You Save: $29.48 (34%)
FAQ for Hood Latch Repair
Q: How do you install the Hood Primary and Secondary Latch?
A:
You need to connect the hood latch cable to the latch, position the latch to the previously marked location on the mounting bracket, install the bolts which retain the latch to the mounting bracket, inspect the latch for proper operation before closing the hood, check the alignment of the latch to the hood striker, and install the grille.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Hood Rear Seal?
A:
Open the hood, remove the rear hood seal from the air-inlet grille panel studs, and remove the seal from the air-inlet grille panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Hood Latch Support?
A:
Remove the headlamp housing panel, the hood latch, the bolts that retain the hood latch support to the radiator support, and the hood latch support.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts retaining the latch to the mounting bracket?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the adjustment procedure for the Hood Latch?
A:
Loosen the bolts retaining the hood latch to the support bracket, move the hood latch from side to side until the striker enters the center of the latch assembly, and tighten to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022