< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Trailblazer
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Trailblazer Wiper Arm
PartNumber: 15214345
Product Specifications- Notes: Envoy/Trailblazer
- Location: Driver Side; Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 3.5 x 21.9 x 1.4 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12487603
- Part Description: 2009 Chevrolet Trailblazer Wiper Arm
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$54.91 MSRP:$99.40You Save: $44.49 (45%)
OEM (Genuine) 2009 Chevrolet Trailblazer Rear Arm
PartNumber: 15232653
Product Specifications- Other Names: Rear Arm, Wiper Arm
- Item Dimensions: 4.0 x 2.4 x 17.7 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15137927
- Part Description: 2009 Chevrolet Trailblazer Rear Arm
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$47.78 MSRP:$86.50You Save: $38.72 (45%)
FAQ for Windshield Wiper Arms Repair
Q: What kind of special tool is needed when replacing the Windshield Wiper Arm (SS)?
A:
You need to use a J 39637 Wiper Arm Puller or slightly rock the arm on the wiper pivot shaft to remove the Windshield Wiper Arm.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Wiper Park (TrailBlazer Envoy)?
A:
First, you need to install the wiper arm park ramp to the vehicle. Then, please install the 2 bolts retaining the wiper arm park ramp to the liftgate. Finally, you should install the liftgate interior trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Wiper Park (TrailBlazer Envoy)?
A:
First, you need to remove the liftgate interior trim panel. Then, please remove the 2 bolts retaining the wiper arm park ramp to the liftgate. Finally, you should remove the wiper arm park ramp from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Windshield Wiper Arm Nut?
A:
The recommended torque is 35 N.m (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Window Wiper Arm (TrailBlazer, Envoy)?
A:
First, you need to park the rear wiper motor and install the wiper arm blade to the wiper arm. Then, please position the wiper arm on the parking ramp and install the wiper arm onto the motor shaft with the nut. Finally, you should reposition the wiper arm cover and connect the washer hose.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Park Ramp Screws?
A:
The recommended torque is 9 N.m (79 lb in).
By Bob
GM Specialist
01/11/2022Q: How to replace the Rear Window Wiper Arm (TrailBlazer SS)?
A:
First, you need to cycle the ignition key on and park the rear wiper motor before installing the arm to the pivot shaft. Then, please place the wiper arm onto the pivot shaft and in the wiper pocket in the full-park position. Finally, you should hold the arm in the pocket while torquing the wiper arm nut to specification.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts retaining the wiper arm park ramp to the liftgate?
A:
The recommended torque is 9 N.m (79 lb in).
By Bob
GM Specialist
01/11/2022Q: What will need to be done before replacing the Rear Window Wiper Arm (TrailBlazer SS)?
A:
You need to position the rear wiper arm at the mid-wipe position on the glass and cycle the ignition key to the off position.
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Window Wiper Arm (TrailBlazer, Envoy)?
A:
First, you need to place the arm in the mid-wipe position on the rear glass. Then, please disconnect the washer hose, and remove the wiper arm cover. Finally, you should remove the wiper arm from the pivot shaft, and remove the wiper arm blade from the wiper arm.
By Bob
GM Specialist
01/11/2022See more FAQs (7)