First, you need to remove the door trim panel, the speaker, and the water deflector, loosen the regulator window carrier bolts and raise and support the window. Then, please disconnect the electrical connector from the regulator motor, loosen the upper 2 bolts that retain the regulator assembly to the door, and remove the remaining 3 bolts that retain the
Window Regulator assembly and the motor to the door. Finally, you should lift the regulator assembly upward to release the upper 2 bolts, rotate the upper portion of the regulator assembly forward, remove the regulator assembly through the door opening, place the regulator assembly on a prepared surface, and remove the upper 2 bolts from the regulator assembly.