< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Trailblazer
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Trailblazer Lumbar Switch
PartNumber: 19121422
Product Specifications- Notes: Passenger Seat, W/Power, Lumbar Adjust, All; Driver Seat, W/Power, Lumbar, 2-Way
- Location: Passenger Side; Driver Side
- Other Names: Control Switch, Lumbar Switch, Seat Switch, Switch
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Trailblazer Lumbar Switch
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$70.81 MSRP:$106.81You Save: $36.00 (34%)
OEM (Genuine) 2009 Chevrolet Trailblazer Adjust Switch
PartNumber: 12451439
Product Specifications- Notes: Driver Seat, W/Power, Seat Adjuster, All; Driver Seat; Bravada/Envoy/Trailblazer
- Location: Driver Side
- Item Dimensions: 7.2 x 7.2 x 6.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89043625
- Part Description: 2009 Chevrolet Trailblazer Adjust Switch
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Trailblazer Switch, Passenger Seat Adjuster & Reclining
PartNumber: 12451440
Product Specifications- Notes: Passenger Seat, W/Power, Seat Adjust; Passenger Seat
- Location: Passenger Side
- Item Dimensions: 4.2 x 4.0 x 2.2 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89042262
- Part Description: 2009 Chevrolet Trailblazer Switch, Passenger Seat Adjuster & Reclining
Vehicle Fitment- 2009 Chevrolet Trailblazer | Base, LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Power Seat Switch Repair
Q: How to install the Driver Seat Adjuster Memory Switch?
A:
First, you need to position the memory seat switch to the lock and door lock, and side window switch. Then, please connect the electrical connector to the memory seat switch. Finally, you should install the door lock and side window switch and verify that the front retaining clips and the rear retaining clips are fully seated.
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Seat Switch?
A:
First, you need to remove the switch bezel assembly from the seat assembly and remove the buttons from the switch. Then, please release the tabs that retain the seat switch to the seat bezel assembly. Finally, you should disconnect the electrical connector from the switch and remove the seat switch from the seat bezel assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the nuts securing the seat position switch to the seat adjuster?
A:
The recommended torque is 24 N.m (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Rear Seat Number 1 Cushion Latch Release Assembly?
A:
First, you need to remove the rear seat cushion assembly from the vehicle. Then, please remove the rear seat cushion cover and the pad. Finally, you should remove the strap from the rear seat cushion latch and remove the 3 bolts securing the rear seat cushion latch to the seat pan.
By Bob
GM Specialist
01/11/2022Q: How to remove the Front Seat Lumbar Control Switch?
A:
First, you need to remove the switch bezel assembly from the seat and remove the power seat switch. Then, please release the tabs that retain the lumbar switch to the switch bezel assembly. Finally, you should disconnect the electrical connector from the lumbar switch and remove the lumbar switch from the switch bezel assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Seat Switch?
A:
First, you need to connect the electrical connector to the switch. Then, please install the seat switch to the seat bezel assembly and install the buttons on the switch. Finally, you should install the switch bezel assembly to the seat assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Seat Position Sensor?
A:
First, you need to remove the seat from the vehicle, unclip the front, rear, and side J-strips on the underside of the seat, and remove the lumbar knob, and the recliner handle. Then, please remove the lumbar cable from the lumbar adjustment mechanism, remove the seat back assembly from the seat cushion assembly, disconnect the seat belt buckle electrical connector, and disconnect the wiring harness from the seat position switch. Finally, you should remove the seat cushion cover and foam, the assist spring, and the seat adjusters, and drill out the rivets securing the sensor to the bracket.
By Bob
GM Specialist
01/11/2022Q: How to install the Front Seat Lumbar Control Switch?
A:
First, you need to connect the electrical connector to the lumbar switch. Then, please install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated. Finally, you should install the power seat switch and install the switch bezel assembly to the seat.
By Bob
GM Specialist
01/11/2022Q: How to install the Rear Seat Number 1 Cushion Latch Release Assembly?
A:
First, you need to install the 3 bolts securing the rear seat cushion latch to the seat pan. Then, please install the small loop onto the rear seat cushion latch, and install the strap through the opening in the seat pan. Finally, you should install the rear seat cushion cover and the pad, and install the rear seat cushion assembly to the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Driver Seat Adjuster Memory Switch?
A:
First, you need to lift up on the front edge of the door lock and side window switch to release the front retaining clip. Then, please lift up on the rear edge of the switch panel to release the 2 rear retaining clips. Finally, you should remove the electrical connector from the memory seat switch and remove the memory seat switch from the lock and door lock, and side window switch.
By Bob
GM Specialist
01/11/2022See more FAQs (5)