2009 Chevrolet Trailblazer Oxygen Sensor

First, you need to wipe the excess oil from the Oil Filter housing, lubricate the oil filter seal with clean engine oil, install the new oil filter and the oil pan drain plug, and lower the vehicle. Then, please fill the crankcase with the proper quantity of engine oil, remove the oil level indicator, wipe the indicator with a clean cloth, and install the oil level indicator. Finally, you should remove the oil level indicator and check the oil level.

First, you need to install the Radiator support shield. Then, please install the radiator support shield mounting nuts and bolts. Finally, you should lower the vehicle.

First, you need to install the Throttle Body assembly to the intake manifold with the gasket and add sealer GM P/N 12346004 (Canadian P/N 10953480) to the throttle control module bolt threads. Then, please install the throttle body assembly retaining bolt, connect the throttle body electrical connector, and install the EVAP canister purge line to the throttle body. Finally, you should install the resonator assembly.