2009 Chevrolet Trailblazer Hood Latch

First, you need to remove the grille and use a grease pencil or other suitable marking device to mark the location of the latch on the mounting bracket. Then, please remove the bolts that retain the latch to the mounting bracket and disconnect the hood latch cable from the latch. Finally, you should remove the latch from the vehicle.

First, you need to connect the hood latch cable to the latch and position the latch to the previously marked location on the mounting bracket. Then, please install the bolts which retain the latch to the mounting bracket and inspect the latch for proper operation before closing the hood. Finally, you should check the alignment of the latch to the hood striker and install the grille.

First, you need to loosen the bolts retaining the hood latch to the support bracket. Then, please move the hood latch from side to side until the striker enters the center of the latch assembly.

First, you need to remove the headlamp housing panel and the hood latch. Then, please remove the bolts that retain the hood latch support to the radiator support. Finally, you should remove the hood latch support from the vehicle.

First, you need to release the primary hood latch to inspect the operation of the pop-up spring. Then, please attempt to raise the hood while the hood is in the pop-up position.