< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Fluid Level Sensor
PartNumber: 20999338
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Fluid Level Sensor, Level Indicator
- Item Dimensions: 8.2 x 8.3 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15213911
- Part Description: 2009 Chevrolet Tahoe Fluid Level Sensor
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$29.84 MSRP:$56.33You Save: $26.49 (48%)
FAQ for Washer Fluid Level Sensors Repair
Q: What should be noticed when replacing the Windshield Washer Solvent Level Indicator?
A:
You need to ensure the square edge faces upward upon installation of the new level indicator.
By Bob
GM Specialist
02/11/2022Q: How many electrical connectors does the Windshield Washer Solvent Heater Assembly have?
A:
It has a total of 2 electrical connectors.
By Bob
GM Specialist
02/11/2022Q: What should be noticed when replacing the Windshield Washer Solvent Level Indicator Grommet?
A:
You need to discard the old grommet and use the new grommet in the kit.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Windshield Washer Solvent Heater Assembly nut?
A:
The recommended torque is 9 Nm (80 lb in).
By Bob
GM Specialist
02/11/2022Q: How do I replace Windshield Washer Solvent Heater Assembly?
A:
You need to disconnect the electrical connectors after removing the heater from the lower plenum panel studs, prime the heated washer fluid unit after installation and cycle the normal wash function until washer fluid sprays from the windshield washer nozzles. The normal wash function fills the heated washer unit with washer solvent after replacement, and then you should activate the heated washer spray function and inspect for proper operation.
By Bob
GM Specialist
02/11/2022Q: How many nuts does the Windshield Washer Solvent Heater Assembly have?
A:
It has a total of 2 nuts.
By Bob
GM Specialist
02/11/2022Q: What should you do before replacing the Windshield Washer Solvent Level Indicator?
A:
You need to remove the windshield washer container, use 2 flat-bladed tools to gently pry the windshield washer solvent level indicator from the side of the washer container, and discard the old windshield washer solvent level indicator grommet.
By Bob
GM Specialist
02/11/2022See more FAQs (2)