< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Tahoe, Yukon, Escalade; Non-Active Fuel Management; Tahoe, Yukon, Escalade; W/O Active Fuel Mgmt.
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2009 Chevrolet Tahoe Valve Lifters
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$36.57 MSRP:$60.54You Save: $23.97 (40%)OEM (Genuine) 2009 Chevrolet Tahoe LIFTER ASM-VLV (AFM)
PartNumber: 12680871
Product Specifications- Other Names: Valve Lifters
- Item Dimensions: 4.0 x 2.1 x 2.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12698946
- Part Description: 2009 Chevrolet Tahoe LIFTER ASM-VLV (AFM)
Vehicle Fitment- 2009 Chevrolet Tahoe | High Country, Hybrid, LS, LT, LTZ, PPV, Premier, RST, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$45.80 MSRP:$79.72You Save: $33.92 (43%)
Sealed Power® Valve Lifter for 2009 Chevrolet Tahoe
PartNumber: HT-2303Product Specifications- Notes: Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 614046896635
- Part Description: 2009 Chevrolet Tahoe Valve Lifter
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
$41.69
Sealed Power® Hydraulic Roller Valve Lifter for 2009 Chevrolet Tahoe
PartNumber: HT-2148Product Specifications- Notes: Hydraulic Roller Lifters;Active Fuel Management Engine;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- UPC: 724956564873
- Part Description: 2009 Chevrolet Tahoe Hydraulic Roller Valve Lifter
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
Sealed Power® Engine Valve Lifter for 2009 Chevrolet Tahoe
PartNumber: HT-2148BProduct Specifications- Notes: Hydraulic Roller Lifters;Bulk Pack;Active Fuel Management Engine;Box of 128;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7;Non Active Fuel Management Eng
- Note: O.E. Replacement
- Package Alert: Carton of 128
- UPC: 724956696369
- Part Description: 2009 Chevrolet Tahoe Engine Valve Lifter
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
Sealed Power® Valve Lifter for 2009 Chevrolet Tahoe
PartNumber: HT-2303BProduct Specifications- Notes: Bulk Pack;Box of 50;Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 019826234780
- Part Description: 2009 Chevrolet Tahoe Valve Lifter
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
FAQ for Valve Lifter Repair
Q: What is the recommended torque for the valve lifter oil manifold bolts?
A:
The recommended torque is 25 Nm(18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter Oil Manifold?
A:
You need to place the service gasket onto the valve lifter oil manifold, install the valve lifter oil manifold to the engine and the valve lifter oil manifold bolts, connect the engine harness electrical connector to the oil pressure sensor, and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter Oil Filter?
A:
You need to install a new valve lifter oil filter O-ring seal into the valve lifter oil manifold and the new valve lifter oil filter, apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent to the threads of the oil pressure sensor, install the oil pressure sensor washer and sensor, connect the engine harness electrical connector to the oil pressure sensor and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the valve lifter guide bolts?
A:
The recommended torque is 12 Nm(106 lb in).
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter?
A:
You need to lubricate the valve lifters and engine block valve lifter bores with clean engine oil, insert the valve lifters into the lifter guides, align the flat area on the top of the lifter with the flat area in the lifter guide bore, push the lifter completely into the guide bore and install the valve lifters and guide to the engine block, the valve lifter guide bolts, and the cylinder head and gasket.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Valve Lifter Oil Manifold?
A:
You need to remove the intake manifold, disconnect the engine harness electrical connector from the oil pressure sensor, remove the valve lifter oil manifold bolts and the valve lifter oil manifold, identify the 8 gasket retaining strap locations, use a cutter type tool to cut the 8 retaining straps and remove the outer gasket from the valve lifter oil manifold.
By Bob
GM Specialist
02/11/2022Q: How do you remove the valve lifter oil filter?
A:
You need to remove the intake manifold, disconnect the engine harness electrical connector from the oil pressure sensor and remove the oil pressure sensor and washer, remove and discard the valve lifter oil filter and remove and discard the valve lifter oil filter O-ring seal.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Valve Lifter?
A:
You need to remove the cylinder head and gasket, the valve lifter guide bolt, and the valve lifter guides with the lifters, note the installed position of the guides, remove the valve lifters from the guide, organize or mark the components so that they can be installed in the same location from which they were removed and clean and inspect the valve lifters.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the oil pressure sensor washer and sensor?
A:
The recommended torque is 35 Nm(26 lb-ft).
By Bob
GM Specialist
02/11/2022See more FAQs (4)