< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Steering Arms, Links & Rods
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Rod Kit, Steering Linkage Outer Tie
PartNumber: 15254061
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 6.1 x 5.7 x 5.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Rod Kit, Steering Linkage Outer Tie
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$102.60 MSRP:$178.59You Save: $75.99 (43%)
Delphi® Front Outer Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: TA5923Product Specifications- Item Grade: Standard Replacement
- UPC: 689604349830
- Part Description: 2009 Chevrolet Tahoe Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.0L
$30.58
OEM (Genuine) 2009 Chevrolet Tahoe Outer Tie Rod
PartNumber: 15895646
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 9.8 x 8.0 x 6.6 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Outer Tie Rod
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$90.07 MSRP:$149.08You Save: $59.01 (40%)
Delphi® Outer Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: TA2788Product Specifications- Adjustable: No
- Bearing Material: Plastic
- Color: Black
- Dust Boot Included: Yes
- Dust Boot Material: CR
- End 1 Gender: Female
- End 1 Thread Diameter: 16.00
- End 1 Thread Direction: Clockwise
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- End 2 Thread Diameter: 14.00
- End 2 Thread Direction: Clockwise
- Finish: Chrome Plating
- Grade: Standard
- Greasable: No
- Grease Fitting Included: No
- Height: 105.00
- Housing Material: Steel
- Item Grade: Standard Replacement
- Length: 162.00
- Length Stud Center to End: 141.00
- Mounting Hardware Included: Yes
- Pre-Greased: No
- Stud Type: Threaded
- Tie Rod Material: Steel
- UPC: 689604270325
- Weight: 1.278668
- Width: 43.00
- Part Description: 2009 Chevrolet Tahoe Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | LS | 8 Cyl 4.8L
- 2009 Chevrolet Tahoe | LS | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | LT | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | LTZ | 8 Cyl 5.3L
- 2009 Chevrolet Tahoe | LTZ | 8 Cyl 6.2L
$17.51
Centric® Premium™ Front Inner Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: 612.66043Product Specifications- UPC: 805890804963
- Part Description: 2009 Chevrolet Tahoe Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$27.10
Centric® Premium™ Front Outer Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: 612.66044Product Specifications- UPC: 805890804970
- Part Description: 2009 Chevrolet Tahoe Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$16.75
Centric® Premium™ Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: 612.62123Product Specifications- UPC: 889590428612
- Part Description: 2009 Chevrolet Tahoe Premium™ Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
Centric® Premium™ Front Outer Steering Tie Rod End for 2009 Chevrolet Tahoe
PartNumber: 612.66111Product Specifications- UPC: 889590060829
- Part Description: 2009 Chevrolet Tahoe Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: How do you install the Steering Linkage Inner Tie Rod (Two-Mode Hybrid)?
A:
You need to install the new steering linkage inner tie rod washer on the steering gear rack, apply LOCTITE(R)262 or equivalent to the steering linkage inner tie rod threads, attach the steering linkage inner tie rod to the steering gear rack and hand tighten it, tighten the steering linkage inner tie rod using wrench CH-49009, align the new steering linkage inner tie rod washer to the flats on the steering linkage inner tie rod and bend the tabs over the flats and install the steering gear boot.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Steering Linkage Outer Tie Rod?
A:
You need to use puller J 24319-B to separate the steering linkage outer tie rod from the steering knuckle, inspect the steering linkage inner tie rod for bent or damaged threads, clean the tapered surface of the steering knuckle, lubricate the steering linkage inner tie rod threads with chassis lubricant and adjust the front toe.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Rear Axle Tie Rod Mounting bolt?
A:
You need to support the rear drive axle before removing either of the mounting bolts and finger-tighten the mounting bolt. This will allow for movement in the rear axle tie rod to align the opposite end mounting bolt and hole.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Rear Axle Tie Rod?
A:
You need to disconnect the park brake cable from the rear axle tie rod.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Steering Linkage Inner Tie Rod?
A:
You need to remove the engine shield, the steering linkage outer tie rod, and the steering linkage inner tie rod from the relay rod using wrench J 34028.
By Bob
GM Specialist
01/11/2022Q: How many mounting bolts does the Rear Axle Tie Rod have?
A:
It has a total of 2 mounting bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Steering Linkage Inner Tie Rod Nut?
A:
The recommended torque is 75 Nm (55 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Steering Linkage Inner Tie Rod?
A:
You need to remove all traces of oil, grease, or other contaminants, clean the threads of the steering linkage inner tie rod with denatured alcohol or the equivalent and allow them to dry, apply red LOCTITE(TM) thread locker, GM P/N 12345493 (Canadian P/N 10953488) to the threads of the steering linkage inner tie rod, install the steering linkage inner tie rod to the relay rod using wrench J 34028, the steering linkage outer tie rod and the engine shield and adjust the front toe.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Steering Linkage Inner Tie Rod (Two-Mode Hybrid)?
A:
You need to remove the steering gear boot, disengage the steering linkage inner tie rod washer from the steering linkage inner tie rod, and rotate the steering linkage inner tie rod counterclockwise while holding the steering gear rack stationary until the steering linkage inner tie rod separates from the steering gear rack and discard the steering linkage inner tie rod washer.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Steering Linkage Outer Tie Rod Nut?
A:
The recommended torque is 60 Nm (44 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (6)