FAQ for Third Brake Light Repair
Q: What should be noticed when replacing the Park Turn Directional (LED)?
A:
The upper portion of the lamp assembly is not serviceable.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Tail Lamp Electrical Harness Assembly Connector?
A:
You need to disconnect the tail lamp electrical connector from the rear tail lamp assembly.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Back Up Lamp Bulb?
A:
You need to rotate the lamp socket counter-clockwise and remove it from the lamp assembly.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Side Marker Lamp Bulb?
A:
You need to rotate the bulb socket and pull the marker lamp bulb from the socket.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Tail Lamp (Chevrolet Tahoe Two-Mode Hybrid)?
A:
You need to open the liftgate to access the light-emitting diode (LED) tail lamp assembly screws.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Tail Lamp Assembly screw?
A:
The recommended torque is 2.5 Nm (22 lb in).
By BobGM Specialist
01/11/2022 Q: How many screws does the Tail Lamp Assembly have?
A:
It has a total of 2 screws.
By BobGM Specialist
01/11/2022 See more FAQs (2)