< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Air Suspension
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Module Asm-Electronic Suspension Control
PartNumber: 25971217
Product Specifications- Notes: Tahoe, Yukon, Escalade; W/O Magneride
- Other Names: Control Module
- Item Dimensions: 10.6 x 7.1 x 2.9 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15893732
- Part Description: 2009 Chevrolet Tahoe Module Asm-Electronic Suspension Control
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2009 Chevrolet Tahoe Module Asm-Electronic Suspension Control
PartNumber: 25971218
Product Specifications- Notes: Tahoe, Yukon, Escalade; W/Magneride
- Other Names: Control Module
- Item Dimensions: 10.5 x 7.0 x 2.9 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Module Asm-Electronic Suspension Control
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Suspension Control Module Repair
Q: How do you remove the Automatic Level Control Air Dryer and Pressure Sensor?
A:
You need to remove the automatic level control air compressor from the vehicle, clean the area around the connection of the automatic level control air dryer to the automatic level control air compressor body, disconnect the electrical connector from the pressure sensor, remove the air dryer/pressure sensor assembly retaining screw, push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly clockwise until the assembly detaches from the automatic level control air compressor body and remove the automatic level control air dryer from the automatic level control air compressor.
By Bob
GM Specialist
02/11/2022Q: How do you install the Automatic Level Control Air Dryer and Pressure Sensor?
A:
You need to install the automatic level control air dryer to the automatic level control air compressor, push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly counterclockwise until the assembly attaches to the automatic level control air compressor body, install the air dryer/pressure sensor assembly retaining screw, connect the electrical connector to the pressure sensor and install the automatic level control air compressor to the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the Electronic Suspension Control Module Nut?
A:
The recommended torque is 10 Nm (89 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do I replace the Electronic Suspension Control Module(ESC) Connector?
A:
You need to remove the ESC module from the slots in the frame and reprogram the ESC module.
By Bob
GM Specialist
01/11/2022Q: How many nuts does the Electronic Suspension Control Module have?
A:
It has a total of 2 nuts.
By Bob
GM Specialist
01/11/2022