< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Steering Systems
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Intermed Shaft
PartNumber: 84370714
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Coupling, Intermed Shaft, Lower Shaft, Upper Shaft
- Item Dimensions: 25.2 x 6.3 x 6.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 23167615, 25809424, 23381952
- Replaced by: 85104192
- Part Description: 2009 Chevrolet Tahoe Intermed Shaft
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$101.75 MSRP:$168.42You Save: $66.67 (40%)
Dorman® Upper Intermediate Steering Shaft for 2009 Chevrolet Tahoe
PartNumber: 425-183Product Specifications- Finish: Black/Epoxy E-coat
- Installation Instructions Included: No
- Material: Steel
- Mounting Hardware Included: No
- OE Part Number: 25809424, 15775842, 23167615, 23381952
- Shaft Diameter: 3.25"
- Shaft Length: 9.75"
- Spline Count: 0
- UPC: 019495432685
- Part Description: 2009 Chevrolet Tahoe Upper Intermediate Steering Shaft
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$62.24
OEM (Genuine) 2009 Chevrolet Tahoe Steering Gear Coupling Shaft Assembly
PartNumber: 25979051
Product Specifications- Other Names: Coupling, Coupling Shaft, Lower Shaft
- Item Dimensions: 6.1 x 6.0 x 25.6 inches
- Item Weight: 4.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420043
- Part Description: 2009 Chevrolet Tahoe Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$497.73 MSRP:$823.81You Save: $326.08 (40%)
OEM (Genuine) 2009 Chevrolet Tahoe Steering Gear Coupling Shaft Assembly
PartNumber: 25979050
Product Specifications- Other Names: Coupling Shaft, Lower Shaft
- Item Dimensions: 25.8 x 5.8 x 5.8 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420042
- Part Description: 2009 Chevrolet Tahoe Steering Gear Coupling Shaft Assembly
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$268.65 MSRP:$426.55You Save: $157.90 (38%)
FAQ for Steering Shaft Repair
Q: What should you do before replacing the Steering Shaft's Lower Bearing?
A:
You need to remove the steering wheel position sensor.
By Bob
GM Specialist
02/11/2022Q: How do you install the Steering Shaft Coupling?
A:
You need to install the steering shaft coupling to the vehicle, the steering shaft coupling nut and bolt at the upper intermediate steering shaft, the steering shaft coupling bolt at the steering gear and the engine shield, and remove the J 42640-anti-rotation pin from the steering column lower access hole.
By Bob
GM Specialist
02/11/2022Q: How do I replace the Steering Shaft Lower Bearing?
A:
You need to release the plastic retaining tabs and slide the steering shaft lower bearing out of the steering column.
By Bob
GM Specialist
02/11/2022Q: What should I install onto the steering column shaft assembly?
A:
You need to lubricate the steering shaft upper bearing inner race with GM P/N 12345718 (Canadian P/N 10953516), install the steering shaft upper bearing inner race, the steering shaft upper bearing inner race seat, and the steering shaft upper bearing spring, lubricate the turn signal switch cancel cam with GM P/N 12377900 (Canadian P/N 10953529) and install the turn signal switch cancel cam and the turn signal switch cancel cam position plate.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Steering Shaft Coupling?
A:
You need to set the front wheels in the straight-ahead position, install the J 42640-anti-rotation pin in the steering column lower access hole, remove the engine shield, mark the relationships of the steering shaft coupling, the upper intermediate steering shaft, and the power steering gear, remove the steering shaft coupling bolt at the steering gear, the steering shaft coupling nut and bolt at the upper intermediate steering shaft and the steering shaft coupling from the vehicle.
By Bob
GM Specialist
02/11/2022Q: What should I remove from the steering column shaft assembly?
A:
You need to remove the turn signal switch cancel cam position plate, the turn signal switch cancel cam, the steering shaft upper bearing spring, the steering shaft upper bearing inner race seat, and the steering shaft upper bearing inner race.
By Bob
GM Specialist
02/11/2022Q: What special tools will I be needing when replacing the Steering Shaft's Upper Bearing?
A:
You will be needing a pivot pin remover, a steering column lock plate compressor, a cam orientation plate adapter, and a steering column anti-rotation pin.
By Bob
GM Specialist
02/11/2022See more FAQs (2)