< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Seat Back Heater
PartNumber: 20792749
Product Specifications- Notes: Passenger Side, W/Power Lumbar, W/O Ht & Cooled Seat; Driver Side, W/Power Lumbar, W/O Ht & Cooled Seat; W/Heated & Cooled Seats, Passenger Side; Tahoe, Yukon, Escalade; Front Seat; Seat Back
- Item Dimensions: 11.8 x 4.9 x 5.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25911156, 15232560
- Part Description: 2009 Chevrolet Tahoe Seat Back Heater
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$68.11 MSRP:$102.74You Save: $34.63 (34%)
OEM (Genuine) 2009 Chevrolet Tahoe Heater Asm-Driver Seat Cushion
PartNumber: 20792748
Product Specifications- Notes: Passenger Side, W/Power Lumbar, W/O Ht & Cooled Seat; Driver Side, W/Power Lumbar; W/Heated & Cooled Seats, Passenger Side; Tahoe, Yukon, Escalade; Front Seat; Seat Cushion
- Other Names: Element, Heater Element, Seat Cushion Heater
- Item Dimensions: 12.8 x 12.5 x 3.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15232559
- Part Description: 2009 Chevrolet Tahoe Heater Asm-Driver Seat Cushion
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$73.07 MSRP:$110.24You Save: $37.17 (34%)
OEM (Genuine) 2009 Chevrolet Tahoe Seat Cushion Heater
PartNumber: 20792750
Product Specifications- Notes: Tahoe, Yukon, Escalade; Rear Seat; Left; Split Bench, 60% Side; Bucket Seat, Left Side
- Location: Driver Side
- Other Names: Element, Heater Element, Seat Cushion Heater
- Item Dimensions: 14.6 x 9.6 x 3.3 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15291596
- Part Description: 2009 Chevrolet Tahoe Seat Cushion Heater
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2009 Chevrolet Tahoe Heater Asm-Rear Seat Cushion
PartNumber: 15824761
Product Specifications- Notes: Tahoe, Yukon, Escalade; Rear Seat; Right; Split Bench, 40% Side; Bucket Seat, Right Side
- Location: Passenger Side
- Other Names: Element, Seat Cushion Heater
- Item Dimensions: 11.3 x 5.4 x 5.3 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20792751
- Part Description: 2009 Chevrolet Tahoe Heater Asm-Rear Seat Cushion
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2009 Chevrolet Tahoe Mat Asm-Front Seat Vent Fan
PartNumber: 22856920
Product Specifications- Notes: Passenger Side, W/Power Lumbar, W/Ht & Cooled Seat; Driver Side, W/Power Lumbar, W/Ht & Cooled Seat
- Other Names: Heater Element, Seat Back Heater
- Item Dimensions: 7.3 x 4.2 x 4.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Mat Asm-Front Seat Vent Fan
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
OEM (Genuine) 2009 Chevrolet Tahoe HEATER
PartNumber: 22856923
Product Specifications- Notes: Passenger Side, W/Power Lumbar, W/Ht & Cooled Seat
- Other Names: Heater Element
- Part Description: 2009 Chevrolet Tahoe HEATER
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Seat Heater Pad Repair
Q: How to test the Driver and Passenger Heated/Cool Seats Inoperative?
A:
Ignition OFF, you need to disconnect the X1 harness connector at the CCSM, verify that a test lamp illuminates between the ground circuit terminal M and B+, verify that a test lamp illuminates between the B+ circuit terminal E and ground, and disconnect the X2 harness connector at the CCSM. Ignition ON, you can verify that a test lamp illuminates between the ignition circuit terminal 1 and the ground. If all circuits test normal, replace the CCSM.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Rear Seat Cushion Cover?
A:
You need to disconnect the seat cushion cover j-channel from the seat cushion frame and the electrical connector and pull the seat cushion cover away from the seat cushion pad to disengage the retaining channel.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Front Seat Back Cushion Cover?
A:
You need to disengage the j-channel retainers from the seat back cushion frame, tilt the seat back forward to make it easier to remove and install the cover, disconnect the electrical connectors that attach to the seat back cushion, and remove the seat back cushion cover and pad from the seat cushion frame as an assembly and the hog rings.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Driver or Passenger Seat Back Cushion Heater (Tahoe with HP2)?
A:
You need to remove the front seat, the front seat back finish panel, the front seat cushion outer trim panel, the front seat cushion inner trim panel, the front seat head restraint, and the front seat head restraint guides.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Front Seat Back Blower Assembly?
A:
You need to disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: How many rivets does the Front Seat Back Blower have?
A:
It has a total of 2 rivets.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Front Seat Back Cushion Finish Panel?
A:
You need to use a nylon flat-bladed tool to push the tabs in on the side of the panel to release them from the seat back to remove.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Seat Cushion Blower Nuts?
A:
The recommended torque is 3 Nm(25 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the visual/physical inspection procedure?
A:
You need to inspect for aftermarket devices that could affect the operation of the system and inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
By Bob
GM Specialist
01/11/2022Q: How to test the Heated and Cooled Seat Switch?
A:
Ignition OFF, you need to disconnect the X4 harness connector at the appropriate door lock/window switch, test for infinite resistance between the low reference circuit terminal 4 and the signal terminals listed below with the switch in the open position, test for less than 2 Ohms between the low reference circuit terminal 4 and the signal terminals listed below with the appropriate switch in the closed position and connect a 3 A fused jumper wire between the low reference circuit terminal 4 and ground and a test lamp between B+ and each control terminal listed below. The appropriate indicator should illuminate.
By Bob
GM Specialist
01/11/2022See more FAQs (16)