FAQ for Power Seat Switch Repair
Q: What is the recommended torque for the Rear Seat Latch Cover bolt?
A:
The recommended torque is 2 Nm (18 lb in).
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Front Memory Seat Switch Assembly?
A:
You need to disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Rear Seat No.1 Folding Actuator Switch Bezel?
A:
You need to pull away from the lock pillar to release.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Front Seat Adjuster Switch Knob?
A:
You need to pull it off to remove it.
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Front Seat Adjuster Switch?
A:
You need to use a small flat-bladed tool to disengage the switch from the outer finish cover.
By BobGM Specialist
01/11/2022 Q: How do I replace the Driver Seat Position Sensor Rivet?
A:
You need to drill out the old rivet and use a new rivet for replacement.
By BobGM Specialist
01/11/2022 Q: How many bolts does the Rear Seat Load Floor Latch have?
A:
It has a total of 4 bolts.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Rear Seat Latch bolts?
A:
The recommended torque is 9 Nm (80 lb in).
By BobGM Specialist
01/11/2022 Q: What should be noticed when replacing the Rear Seat No.1 Folding Actuator Switch Assembly?
A:
You need to disconnect the electrical connector and separate it from the bezel to replace it.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Memory Seat Switch Screw?
A:
The recommended torque is 2 Nm(18 lb in).
By BobGM Specialist
01/11/2022 See more FAQs (13)