< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Release Switch
PartNumber: 15798062
Product Specifications- Notes: Tahoe, Lift Gate Window
- Other Names: Release Switch
- Item Dimensions: 2.3 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22863048
- Part Description: 2009 Chevrolet Tahoe Release Switch
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$40.04 MSRP:$62.98You Save: $22.94 (37%)
OEM (Genuine) 2009 Chevrolet Tahoe Release Switch
PartNumber: 15106857
Product Specifications- Notes: Lift Gate Door
- Other Names: Release Switch
- Item Dimensions: 19.6 x 5.0 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Tahoe Release Switch
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$20.07 MSRP:$30.29You Save: $10.22 (34%)
FAQ for Liftgate Release Switch Repair
Q: How do I replace the Power Liftgate Actuator Module Retainer?
A:
You need to press the retainer to release.
By Bob
GM Specialist
01/11/2022Q: How do I replace the Electrical Connector?
A:
You need to disconnect the electrical connector. If a replacement control module is installed, program the replacement module.
By Bob
GM Specialist
01/11/2022Q: How many screws does the liftgate release switch have?
A:
It has a total of 4 screws.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Power Liftgate Switch?
A:
You need to cut the tie strap if equipped and replace it after the repair, disconnect the electrical connector, and reprogram the power liftgate actuator switch replacement.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Liftgate Release Switch screw?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Release Switch (Except Avalanche and Escalade EXT)?
A:
You need to remove the liftgate handle.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Liftgate Actuator Switch?
A:
You need to remove the left rear quarter trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Power Liftgate Switch Screw?
A:
The recommended torque is 0.2 Nm (1.7 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (3)