FAQ for Hvac Heater Blend Door Actuator Repair
Q: How do I replace Auxiliary Mix Door Actuator?
A:
You need to re-calibrate the mode actuator.
By BobGM Specialist
01/11/2022 Q: How many screws does the Mode Actuator-Auxiliary have?
A:
It has a total of 2 screws.
By BobGM Specialist
01/11/2022 Q: How do I replace the Mode Actuator-Auxiliary?
A:
You need to re-calibrate the mode actuator.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Mode Valve Actuator?
A:
You need to remove the knee bolster and the air outlet duct-floor LH and disconnect the electrical connector from the mode actuator.
By BobGM Specialist
01/11/2022 Q: How many screws does the Air Temp Actuator have?
A:
It has a total of 2 screws.
By BobGM Specialist
01/11/2022 Q: How many screws does the Temp Door Actuator have?
A:
It has a total of 2 screws.
By BobGM Specialist
01/11/2022 Q: How do I replace the Mode Actuator?
A:
You need to re-calibrate the mode actuator.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Recirculation Actuator screw?
A:
The recommended torque is 2 N.m (18 Ib in).
By BobGM Specialist
01/11/2022 Q: How do I replace Mode Actuator-Auxiliary?
A:
You need to re-calibrate the mode actuator.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Auxiliary Mode Valve Actuator (Behr)?
A:
You need to remove the right rear quarter trim panel, reposition the auxiliary HVAC module inward to gain access to the mix door actuator, and disconnect the electrical connector from the mix door actuator.
By BobGM Specialist
01/11/2022 See more FAQs (24)