Part Description: 2009 Chevrolet Tahoe Lock Cylinder
More Info
Vehicle Fitment
2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Part Description: 2009 Chevrolet Tahoe Upper Striker
More Info
Vehicle Fitment
2009 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$7.55MSRP: $11.37
You Save: $3.82 (34%)
FAQ for Door Lock Cylinder Repair
Q: What should be noticed when replacing the Front Side Door Lock Cylinder clip retainers?
A:
You need to remove the clip that attaches the cylinder to the door handle.
By Bob
GM Specialist
01/11/2022
Q: What should you do before replacing the Door Lock Cylinder?
A:
You need to position the door window as needed for service and remove the door trim panel, the water deflector, and the outside door handle.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be noticed when replacing the Rear Side Door Upper Hinge?
A:
You need to check the door for proper alignment, then adjust as necessary.
Q: What should be noticed when replacing the Rear Side Door Outside Handle Bolt?
A:
You need to release the outside handle rod from the lock retainer clip and the lock cylinder rod from the door lock and remove to outside door handle with the rod attached.
Q: What should be noticed when replacing the Front Side Door Inside Handle Assembly?
A:
You need to disconnect the electrical connector. If replacing the door handle, transfer the heated seat switch to the new handle.