< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Camshaft
PartNumber: 12625436
Product Specifications- Notes: Tahoe, Yukon, Escalade; 5.3l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.3 x 28.1 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593207
- Part Description: 2009 Chevrolet Tahoe Camshaft
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ, PPV, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$394.25 MSRP:$652.53You Save: $258.28 (40%)OEM (Genuine) 2009 Chevrolet Tahoe Camshaft
PartNumber: 12711967
Product Specifications- Notes: Tahoe, Yukon, Escalade; 6.2l; All
- Other Names: Camshaft
- Fitment Type: Direct Replacement
- Replaces: 12623065, 12617373
- Part Description: 2009 Chevrolet Tahoe Camshaft
Vehicle Fitment- 2009 Chevrolet Tahoe | LTZ | 8 Cyl 6.2 L FLEX
$383.81 MSRP:$635.25You Save: $251.44 (40%)OEM (Genuine) 2009 Chevrolet Tahoe Camshaft
PartNumber: 12689035
Product Specifications- Notes: Tahoe, Yukon, Escalade; 4.8l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.3 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593205, 12625437
- Part Description: 2009 Chevrolet Tahoe Camshaft
Vehicle Fitment- 2009 Chevrolet Tahoe | LS | 8 Cyl 4.8 L GAS
$300.01 MSRP:$496.57You Save: $196.56 (40%)OEM (Genuine) 2009 Chevrolet Tahoe Camshaft Asm
PartNumber: 12629698Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.3 x 3.3 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12612275
- Part Description: 2009 Chevrolet Tahoe Camshaft Asm
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$199.87 MSRP:$347.85You Save: $147.98 (43%)
FAQ for Camshaft Repair
Q: How do you remove the Camshaft Position Actuator Solenoid Valve?
A:
You need to remove the camshaft position (CMP) actuator magnet and discard the CMP actuator solenoid valve.
By Bob
GM Specialist
29/10/2022Q: How do you install the camshaft position actuator solenoid valve?
A:
You need to install the new CMP actuator solenoid valve, tighten the CMP actuator solenoid valve and install the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the first design of hex head bolts?
A:
The recommended torque is 25 N.m (18 Ib ft).
By Bob
GM Specialist
29/10/2022Q: How do you install the Camshaft Position Actuator Magnet?
A:
You need to install a new CMP actuator magnet gasket onto the CMP actuator magnet, the CMP actuator magnet to the front cover, and the CMP actuator magnet bolts, connect the engine harness electrical connector to the CMP actuator magnet, and install the water pump.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the second design TORX(R) head bolts?
A:
The recommended torque is 15 N.m (11 Ib-ft).
By Bob
GM Specialist
29/10/2022Q: How do you remove the Camshaft Position Actuator?
A:
You need to remove the oil pump, remove and discard the camshaft position (CMP) actuator solenoid valve, loosen and separate the CMP actuator and timing chain from the camshaft, position your fingers behind the actuator sprocket and pull the actuator away from the front of the camshaft, remove the CMP actuator and timing chain and insert and secure a tie strap through the center of the actuator and over the reluctor wheel.
By Bob
GM Specialist
29/10/2022Q: How do you remove the Camshaft?
A:
You need to remove the radiator support, the valve lifters, and the engine front cover, install the J 42386-A and bolts, use one M10-1.5 x 120 mm and one M10-1.5 x 45 mm bolt for proper tool operation, rotate the crankshaft sprocket until the camshaft position (CMP) actuator alignment mark and the crankshaft sprocket alignment mark are aligned, remove and discard the CMP actuator solenoid valve, the CMP actuator and timing chain, and the camshaft retainer bolts and retainer, install the camshaft sprocket bolt into the camshaft front bolt hole, use the bolt as a handle, carefully rotate and remove the camshaft from the engine block and remove the bolt from the camshaft.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the valve a first pass?
A:
The recommended torque is 65 N.m (48 Ib ft).
By Bob
GM Specialist
29/10/2022Q: How do you remove the Camshaft Position Actuator Magnet?
A:
You need to remove the water pump, disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet and remove the CMP actuator magnet bolts and magnet and remove and discard the CMP actuator magnet gasket.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the solenoid valve a first pass?
A:
The recommended torque is 65 N.m (48 Ib ft).
By Bob
GM Specialist
29/10/2022See more FAQs (5)