< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Tahoe
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Tahoe Booster Assembly
PartNumber: 19417211
Product Specifications- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 17.1 x 13.1 x 12.7 inches
- Item Weight: 10.00 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432803
- Part Description: 2009 Chevrolet Tahoe Booster Assembly
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
$339.48 MSRP:$640.54You Save: $301.06 (48%)
Cardone Reman® Remanufactured Vacuum Power Brake Booster w/o Master Cylinder for 2009 Chevrolet Tahoe
PartNumber: 54-77090Product Specifications- Notes: without Master Cylinder;GM Brake Codes are on the "Service Parts Identification" sticker.;with Brake Code JD9
- Booster Type: Vacuum
- Casting Material: Steel
- Color: Powder Coated Gray
- Diaphragm Diameter: 10.790"
- Diaphragm Type: Dual
- E-Waste: No
- Master Cylinder: Without
- Master Cylinder Stud Thread Size: M10 x 1.5
- Material: Steel
- Part Description: 2009 Chevrolet Tahoe Remanufactured Vacuum Power Brake Booster w/o Master Cylinder
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | All Engines
$98.24
OEM (Genuine) 2009 Chevrolet Tahoe Booster Assembly
PartNumber: 19417219
Product Specifications- Other Names: Booster Assembly, Brake Booster
- Item Dimensions: 17.6 x 13.3 x 12.5 inches
- Item Weight: 10.80 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432806
- Part Description: 2009 Chevrolet Tahoe Booster Assembly
Vehicle Fitment- 2009 Chevrolet Tahoe | LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX
$328.80 MSRP:$620.40You Save: $291.60 (48%)
Centric® Power Brake Booster for 2009 Chevrolet Tahoe
PartNumber: 160.81241Product Specifications- UPC: 805890902096
- Part Description: 2009 Chevrolet Tahoe Power Brake Booster
Vehicle Fitment- 2009 Chevrolet Tahoe | All Trims | 8 Cyl 6.2L
OEM (Genuine) 2009 Chevrolet Tahoe Adapter-Brake Master Cylinder
PartNumber: 25862232
Product Specifications- Other Names: Booster
- Item Dimensions: 13.1 x 6.3 x 6.2 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15817530
- Part Description: 2009 Chevrolet Tahoe Adapter-Brake Master Cylinder
Vehicle Fitment- 2009 Chevrolet Tahoe | Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
FAQ for Brake Booster Repair
Q: What is the recommended torque for the brake booster nuts?
A:
The recommended torque is 33 Nm (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you install the Power Vacuum Brake Booster?
A:
You need to install a new brake booster gasket, the power vacuum brake booster to the vehicle and the brake booster nuts, connect the brake booster pushrod to the brake pedal pivot pin, install the stop lamp switch, the brake booster pushrod retainer, the brake booster pushrod retainer bolt and the vacuum hose to the check valve, connect the electrical connectors to the DOD sensor and the active booster connector and install the master cylinder and the 2 master cylinder nuts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the brake booster pushrod retainer bolt?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: How do you remove the power brake booster?
A:
You need to apply the parking brake and block the wheels, disconnect the inlet hose, the steering gear, and the return hoses from the booster assembly and remove the master cylinder to hydraulic booster nuts and set the master cylinder aside in the engine compartment, the stop lamp switch, the 4 boosters to bulkhead nuts, the booster assembly and the gasket.
By Bob
GM Specialist
01/11/2022Q: How do you install the power brake booster?
A:
You need to install the gasket, the booster assembly, the 4 booster to bulkhead nuts, the stop lamp switch, and the master cylinder to the brake booster, connect the return hose, the steering gear, and the inlet hoses, bleed the hydraulic booster system and release the park brake and unblock the wheels.
By Bob
GM Specialist
01/11/2022Q: How do you remove the Power Vacuum Brake Booster?
A:
You need to apply the parking brake, deplete the vacuum reserve in the vacuum booster by applying the brake pedal 3 times or until the brake pedal becomes firm, remove the electrical connectors for the DOD sensor and the active booster connector, the vacuum hose from the check valve and the 2 master cylinder nuts, position the master cylinder aside and secure with heavy mechanics wire or equivalent, remove the brake booster pushrod retainer bolt, the brake booster pushrod retainer and the stop lamp switch, disconnect the brake booster pushrod from the brake pedal pivot pin and remove the brake booster nuts and the power vacuum brake booster, and remove and discard the brake booster gasket.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Power Brake Booster Vacuum Sensor?
A:
You need to turn the ignition switch to the OFF position, apply the brake pedal several times until the brake pedal becomes firm to deplete the power brake booster vacuum reserve, and disconnect the power brake booster vacuum sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 4 booster to bulkhead nuts?
A:
The recommended torque is 33 Nm (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the 2 master cylinder nuts?
A:
The recommended torque is 33 Nm (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Power Brake Booster Vacuum Sensor?
A:
If necessary, a small amount of denatured alcohol can be used as an assembly aid for installing the power brake booster vacuum sensor to the brake booster, and do not use soap.
By Bob
GM Specialist
01/11/2022See more FAQs (5)