FAQ for Body Control Module Repair
Q: What should be noticed when replacing the Body Control Module?
A:
You need to remove the BCM cover, disconnect the electrical connectors, and press on the tabs to release the body control module. If a replacement module is installed, program the module.
By BobGM Specialist
01/11/2022 Q: How do I replace the Serial Data Gateway Module Assembly?
A:
You need to press on the tabs to release the serial data gateway module, disconnect the electrical connectors and reprogram the serial data gateway module if replaced.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Serial Data Gateway Module (HP2)?
A:
You need to remove the inflatable restraint module.
By BobGM Specialist
01/11/2022 Q: How do I replace the Auxiliary Body Control Module?
A:
You need to press on the tabs to release the auxiliary body control module, disconnect the electrical connectors, and reprogram the auxiliary body control module if replaced.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the body control module?
A:
You need to remove the knee bolster.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Auxiliary Body Control Module?
A:
You need to remove the inflatable restraint module.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Communication Interface Module (Except Cadillac)?
A:
You need to remove the instrument panel accessory trim plate, the HVAC control module, and the radio.
By BobGM Specialist
29/10/2022 Q: What should be noticed when replacing the Communication Interface Module?
A:
You need to push outward on the two tabs to release the communication interface module from the bracket and disconnect the electrical connectors. When replacing the communication interface module be sure to transfer the Bluetooth antenna if equipped. Then you can reprogram the communication interface module after replacement.
By BobGM Specialist
29/10/2022 See more FAQs (3)