< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Wiper Arm
PartNumber: 22917501
Product Specifications- Notes: 2ND Design; Escalade Esv; Right; All;Yukon XL, Suburban; Right; All
- Location: Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 4.0 x 27.0 x 0.9 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25879116
- Part Description: 2009 Chevrolet Suburban 1500 Wiper Arm
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$37.56 MSRP:$68.00You Save: $30.44 (45%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Rear Arm
PartNumber: 15277756
Product Specifications- Notes: Escalade Esv;Yukon Xl, Suburban
- Other Names: Front Transmission, Rear Arm, Wiper Arm
- Item Dimensions: 2.4 x 18.4 x 1.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Rear Arm
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Suburban 1500 Wiper Arm
PartNumber: 22917502
Product Specifications- Notes: 2ND Design; Escalade Esv; Left; All;Yukon XL, Suburban; Left; All
- Location: Driver Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 4.2 x 27.0 x 1.2 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25879117
- Part Description: 2009 Chevrolet Suburban 1500 Wiper Arm
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What are the preliminary procedures for Rear Window Wiper Arm Parking Ramp replacement?
A:
You should open the liftgate and remove the interior liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the ear Window Wiper Arm Park Ramp Nut?
A:
The recommended torque is 9 Nm(80 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Rear Window Wiper Arm Park Ramp?
A:
Upon installation, you should align the pin in the rear of the ramp to the hole in the liftgate outer panel.
By Bob
GM Specialist
01/11/2022Q: What should be cautioned in replacing the Windshield Washer Arm Nut?
A:
You should hold the wiper blade arm tip to the vertical black bar target mark located at the lower center portion of the windshield while securing the nut.
By Bob
GM Specialist
01/11/2022Q: What should be cautioned in replacing the Windshield Washer Arm Hose?
A:
You should disconnect the washer hose at the air inlet panel.
By Bob
GM Specialist
01/11/2022Q: What should be cautioned in replacing the Windshield Washer Arm Finish Cap?
A:
You should use a small flat-bladed tool to remove the finish cap.
By Bob
GM Specialist
01/11/2022See more FAQs (1)