2009 Chevrolet Suburban 1500 Wheel Bearing

You should raise and support the vehicle, remove the tire and wheel, remove the rotor, remove the wheel speed sensor and brake hose mounting bracket bolt from the steering knuckle, disconnect the electrical connection for the wheel speed sensor, remove the wheel driveshaft nut retaining cover, wrap shop towel around the inner and outer wheel drive shaft booth, remove the wheel driveshaft assembly retaining nut and washer from the wheel driveshaft assembly, remove the wheel hub and bearing mounting bolts, remove the wheel hub and bearing and splash shield from the vehicle, remove the O-ring seal from the steering knuckle bore, remove the wheel speed sensor from the wheel hub and bearing and clean and inspect the O-ring seal.

You should clean all corrosion or contaminates from the steering knuckle bore and the hub and bearing assembly, lubricate the steering knuckle bore with wheel bearing grease or the equivalent, install the O-ring to the steering knuckle, install the wheel speed sensor to the wheel hub and bearing, install the wheel hub and bearing and splash shield to the vehicle, install the wheel hub and bearing mounting bolts, install the nut and washer retaining the wheel drive shaft assembly to the wheel hub and bearing, connect the electrical connection for the wheel speed sensor, install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle, install the rotor and install the tire and wheel.