< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Fluid Level Sensor
PartNumber: 20999338
Product Specifications- Notes: Escalade Esv;Yukon Xl, Suburban
- Other Names: Fluid Level Sensor, Level Indicator
- Item Dimensions: 8.2 x 8.3 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15213911
- Part Description: 2009 Chevrolet Suburban 1500 Fluid Level Sensor
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$29.84 MSRP:$56.33You Save: $26.49 (48%)
FAQ for Washer Fluid Level Sensors Repair
Q: What should be cautioned in replacing the Windshield Washer Solvent Level Indicator?
A:
You should ensure the square edge faces upward upon installation of the new level indicator.
By Bob
GM Specialist
02/11/2022Q: What should be cautioned in replacing the Windshield Washer Solvent Heater Assembly?
A:
You should disconnect the electrical connectors after removing the heater from the lower plenum panel studs, prime the heated washer fluid unit after installation, and cycle the normal wash function until the washer fluid sprays from the windshield washer nozzles. The normal wash function fills the heated washer unit with washer solvent after replacement. Then you should activate the heated washer spray function and inspect for proper operation.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the Windshield Washer Solvent Heater Assembly Nut?
A:
The recommended torque is 9 Nm(80 lb in).
By Bob
GM Specialist
02/11/2022Q: What modules are included in Recall-Heated Windshield Washer Module Short Circuit?
A:
They are 2006-2009 Buick Lucerne, 2008-2009 Buick Enclave, 2006-2009 Cadillac DTS, 2007-2009 Cadillac Escalade, Escalade ESV, Escalade EXT, 2008-2009 Cadillac CTS, 2007-2009 Chevrolet Avalanche, Silverado, Suburban, Tahoe, 2009 Chevrolet Traverse, 2007-2009 GMC Acadia, Sierra, Yukon, Yukon XL, 2006-2009 HUMMER H2, 2007-2009 Saturn OUTLOOK and Equipped with Heated Washer Fluid System (RPO XA7/CHW).
By Bob
GM Specialist
02/11/2022Q: What are the preliminary procedures for Windshield Washer Solvent Heater replacement?
A:
You should remove the left side front fender rear upper bracket to access the heater more efficiently.
By Bob
GM Specialist
02/11/2022Q: What should be cautioned in replacing the Windshield Washer Nozzle Hose (Outlet)?
A:
You should disconnect the air inlet panel hose from the outlet side of the heater assembly.
By Bob
GM Specialist
02/11/2022Q: What are the preliminary procedures for Windshield Washer Solvent Level Indicator replacement?
A:
You should remove the windshield washer container, pry the windshield washer solvent level indicator from the side of the washer container and discard the old windshield washer solvent level indicator grommet.
By Bob
GM Specialist
02/11/2022Q: What should be cautioned in replacing the Windshield Washer Solvent Level Indicator Grommet?
A:
You should discard the old grommet and use the new grommet in the kit.
By Bob
GM Specialist
02/11/2022See more FAQs (3)